599913

Makita EY2650H Manual

13
Zoom out
Zoom in
Previous page
1/264
Next page
13
Adjusting the chain tension
CAUTION:
 Keep the applicable chain tension. Loose tension can cause the saw chain
to come off during operation. Too tight tension can damage the saw chain or
guide bar.
 During operation, check the chain tension frequently. The saw chain stretches
and becomes loose during operation. When use a new saw chain, adjust the
tension more frequently.
Adjust the chain tension as the following steps.
1. Loose the nut (A) a half turn.
2. Hold the bar nose up. Turn the tensioning screw (B) clockwise until the saw
FKDLQ¿WVWKHXQGHUVLGHRIWKHJXLGHEDUVQXJO\
3. Grasp the saw chain in the middle of the guide bar and lift up. The gap
between the guide bar and the tie strap of the saw chain should be
DSSUR[LPDWHO\PP´´,ILWLVQRWWXUQWKHWHQVLRQLQJ
screw counterclockwise slightly and do the step 2 again.
4. Tighten the nut (A) securely.
5. If necessary, tighten the tensioning screw a little to prevent it from falling.
Filling the chain oil tank
The saw chain must be lubricated with chain oil during operation.
%HIRUHRSHUDWLRQ¿OOWKHFKDLQRLOWDQN$IWHUVXSSO\LQJWKHRLOWLJKWHQWKHRLOFDS
securely.
Use Makita genuine chain oil only.
NOTICE:
 Never use waste oil. It may damage the oil pump.
 $YRLGGXVW\HQYLURQPHQWZKHQ¿OOLQJWKHFKDLQRLO'XVWDQGRWKHUIRUHLJQ
materials may damage the oil feed system.
'XULQJRSHUDWLRQDOZD\VSD\DWWHQWLRQWRWKHRLOOHYHO5H¿OOWKHWDQNLIWKHRLO
level becomes low. The tank becomes empty in approximately 40 minutes of
operation (depending on the setting of the chain lubrication).
A
B
Adjusting the chain-oil feeding rate
The chain-oil feeding rate is adjustable in three steps. According to the
operation, for example cutting hard limbs, adjust the feeding rate.
7RDGMXVWWKHFKDLQRLOIHHGLQJUDWHXVHDÀDWEODGHGVFUHZGULYHU3XVKLQWKH
adjusting screw and turn it. To increase feeding rate, turn the adjusting screw
counterclockwise (A). To reduce feeding rate, turn it clockwise (B).
After adjusting the chain-oil feeding rate, check the feeding rate by driving the
equipment at medium speed.
A
B
… 13 …


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Makita EY2650H at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Makita EY2650H in the language / languages: English, German, Dutch, Danish, French, Italian, Portuguese, Spanish as an attachment in your email.

The manual is 8,89 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info