599913

Makita EY2650H Manual

12
Zoom out
Zoom in
Previous page
1/264
Next page
12
A
B
C
D
E
F
K
J
G
H
I
E
K
J
D
Assembling saw chain and guide bar
CAUTION: Make sure that the saw chain, guide bar and sprocket match each
other in gauge and pitch.
Assemble the saw chain and guide bar as the following steps.
1. Loosen the nut (A) and remove the bar holder (B).
2. Turn the tension screw (C) counterclockwise until the tensioning nut (D)
touches the left end.
NOTICE:
 Do not turn the tension screw counterclockwise too much, otherwise the
tension screw and the tensioning nut comes off from the housing.
3. Fit the saw chain (E) into the groove of guide bar (F). Start the procedure
from the bar nose.
4. Align the position bolt (G) with the notch of the guide bar (H)DQGWKHQ¿W
the saw chain (E) onto the sprocket (I). Make sure that the saw chain is kept
¿WWLQJDORQJWKHJXLGHEDUGXULQJWKHSURFHGXUH
5. Install the guide bar (F) so that the tensioning nut (D)¿WVLQWRWKHKROH(J) on
the guide bar. Holes (K) are not used.
6. Place the saw chain onto the groove of the guide bar properly. If the saw
chain is not placed into the groove of the guide bar properly at this point,
DGMXVWDQG¿WLWDSSURSULDWHO\
7. Fit the bar holder (B) and tighten the nut (A) securely. Then loose the nut a
half turn as a provision of the chain tension adjustment.
 $GMXVWWKHFKDLQWHQVLRQ5HIHUWRWKHVHFWLRQ³$GMXVWLQJWKHFKDLQWHQVLRQ´
CAUTION:
 Keep the applicable chain tension. Loose tension can cause the saw chain
derail.
To remove the saw chain and guide bar, turn the tension screw (C)
FRXQWHUFORFNZLVH¿UVW
Pull the saw chain outward to let the saw chain comes out from the groove of
the guide bar, then remove them from the housing.
… 12 …


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Makita EY2650H at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Makita EY2650H in the language / languages: English, German, Dutch, Danish, French, Italian, Portuguese, Spanish as an attachment in your email.

The manual is 8,89 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info