599870
18
Zoom out
Zoom in
Previous page
1/112
Next page
18
SPECIFICATIONS
ASSEMBLY
The Importance of Proper Assembly
Proper assembly is vital to operator safety and the
machine reliability. Any error or oversight made by the
person assembling or servicing a unit can easily result in
faulty operation, damage to the machine, or injury to the
operator.
WARNING:
Improper assembly can cause an unsafe condition
that can lead to severe personal injury or loss of life.
Follow the procedures and precautions in the
assembly instructions carefully.
Some of the most important safety precautions are given
below.
However, we cannot cover every conceivable hazard that
can arise in performing this assembly, so please
remember that only you can decide whether or not you
should perform a given task.
WARNING:
Failure to properly follow instructions and
precautions can cause severe personal injury or loss
of life.
Follow the procedures and precautions in this manual
carefully.
Important Safety Precautions
Have a clear understanding of all basic shop safety
practices and wear appropriate clothing and safety
equipment. When performing this assembly, be
especially careful of the following:
- Before beginning work, read the instructions and
be sure you have the tools and skills required to
perform the tasks safely.
Make sure the engine is off before beginning any
maintenance or repairs. This will help eliminate several
potential hazards:
MODEL EG2250A EG2850A EG4550A EG5550A EG6050A
Generator
Type Brush, 2-poles, single phase
Voltage regulating system AVR type
AC Output
230 - 50
Rated voltage-Frequency V-Hz
Rated current A 8.7 11.3 17.4 21.7 24
Rated output VA (W) 2,000 2,600 4,000 5,000 5,500
Maximum output VA (W) 2,200 2,800 4,500 5,500 6,000
Rated power factor 1.0
Safety device type Circuit breaker
DC Output
12
Rated voltage V
Rated current A 8.3
Safety device type Circuit breaker
Engine
Model 170F 190F
Type OHV 4-stroke single cylinder
Displacement mL 210 420
Fuel Automotive Unleaded Gasoline
Fuel tank capacity (Full) L 15 25
Fuel tank capacity
(regulated Fuel volume)
L10 20
Engine oil capacity L 0.6 1.1
Spark plug Champion RN9YC
Starting system Recoil starter Electric starter / Recoil
Dimension
Length mm 600 680
Width mm 442 550
Height mm 450 550
Noise
(according to
2000/14/EC)
Sound pressure level dB (A) 75 (Uncertainty K=3)
Sound power level dB (A) 95 (Uncertainty K=3)
Dry weight kg 42 45 80 83 85
Gross weight
Weight according to EPTA procedure 01/2003
kg
49.8 52.8 95.5 98.5 100.5
18


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Makita EG2850A at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Makita EG2850A in the language / languages: English, German, Dutch, French, Italian, Spanish as an attachment in your email.

The manual is 3,06 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info