Manual Makita EBH341U (page 17 of 232) (English, German, Dutch, Danish, French, Italian, Portuguese, Turkish, Spanish)

599867

Zoom out

Zoom in

1/232

Replacing the nylon cord

1. Put off cover from housing, pressing two cover locking tabs located

oppositely on side of the housing.

2. Take off tap knob and spool from the housing.

3. Put each one end of two cutting lines into each holes at inner most of the

slot on one of spool outer ﬂanges. Put the lines into spool gutters through

each slit on the ﬂanges.

4. Wind the lines up ﬁrmly to the direction slown by left-hand (LH) arrow on the

ﬂange. Do not cross the lines.

5. Wind all but about 100 mm (3-15/16”) of the Cords, leaving the end

temporarily hooked through a notch on the side of the spool.

6. Put tap knob onto the housing hub, positioning it can freely move up and

down against spring tension. Put the spool into the housing, aligning the

teeth on spool and tap knob alternately like gears.

Cover

Locking

Tab

Pull up

Housing Window

Tab knob

Spool

There is a hole inner

most of the slit

Slit

To “LH” direction

Wind tightly

100 mm from

notches

Tab knob’s Teeth

Spool’s Teeth

Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

Forumrules

To achieve meaningful questions, we apply the following rules:

First, read the manual;
Check if your question has been asked previously;
Try to ask your question as clearly as possible;
Did you already try to solve the problem? Please mention this;
Is your problem solved by a visitor then let him/her know in this forum;
To give a response to a question or answer, do not use this form but click on the button 'reply to this question';
Your question will be posted here and emailed to our subscribers. Therefore, avoid filling in personal details.

new questions and answers
new manuals

You will receive an email to register for one or both of the options.

Get your user manual by e-mail

Enter your email address to receive the manual of Makita EBH341U in the language / languages: English, German, Dutch, Danish, French, Italian, Portuguese, Turkish, Spanish as an attachment in your email.

The manual is 5,77 mb in size.

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.

Info

Makita EBH341U Manual

Product: