Manual Makita EBH341R (page 10 of 149) (English, German, Dutch, French, Italian, Portuguese, Spanish)

448381

Zoom out

Zoom in

1/149

CAUTION : Before performing any work on the brush

cutter, always switch off the motor and pull the

spark plug connectors off the spark plug.

Beware of hot engine pars and sharp blade

edges.

Always wear protective gloves!

CAUTION : Start the brush cutter only after having as-

sembled it completely.

1. Joining flexible pipe with engine and pipe case holder

Insert on end of a flexible pipe (1) into a clutch housing (2) on

an engine until it locks with a slight “click” noise.

Insert the other end of the flexible pipe into a pipe case (3)

holder of a brush cutter until it locks.

Each end of the flexible pipe is interchangeable.

Make sure that a squsre end of a flexible shaft fits into the joint

of a drive shaft.

CAUTION : If you have difficulty to insert the flexible pipe

properly, the square end of the flexible shaft

may not fit the drive shaft joint. Do not force to

push to avoid damage on the flexible shaft end.

Repeat the same procedure again until flexible

shaft and pipe fit properly.

2. Mounting of control cable

–Remove the air cleaner cover.

–Place the control cable (4) in the adjusting bolt (5), and shift the

swivel (6) so that the cable will be put in the swivel groove. At

this time, the round-hole side of the swivel will be oriented

toward the inner wire end-metal fitting.

–Release the swivel, and confirm that the inner wire-end metal

fitting will be placed in the hole.

–Mount the air cleaner cover.

ASSEMBLY OF ENGINE AND DRIVE SHAFT

Round-hole

End fitting

Control cable

Swivel

Insert

Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

Forumrules

To achieve meaningful questions, we apply the following rules:

First, read the manual;
Check if your question has been asked previously;
Try to ask your question as clearly as possible;
Did you already try to solve the problem? Please mention this;
Is your problem solved by a visitor then let him/her know in this forum;
To give a response to a question or answer, do not use this form but click on the button 'reply to this question';
Your question will be posted here and emailed to our subscribers. Therefore, avoid filling in personal details.

new questions and answers
new manuals

You will receive an email to register for one or both of the options.

Get your user manual by e-mail

Enter your email address to receive the manual of Makita EBH341R in the language / languages: English, German, Dutch, French, Italian, Portuguese, Spanish as an attachment in your email.

The manual is 3,44 mb in size.

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.

Info

Makita EBH341R Manual

Product: