Manual Makita EB7660TH (page 10 of 172) (English, German, Dutch, Danish, French, Italian, Portuguese, Turkish, Spanish)

690563

Zoom out

Zoom in

1/172

9. Warm-up is complete when quick engine acceleration from low

rpm to full throttle is felt.

NOTE: If the operator keeps pulling the starter handle several

times with the choke lever left in the “CLOSE” position, the

engine may be difcult to start because of ooding of the fuel.

In case of ooding of the fuel, remove the spark plug and pull the

handle several times rapidly to discharge any excess fuel. Dry the

spark plug electrode.

When the engine is warm (warm start)

1. Put the blower on a at surface.

2. Push the primer pump several times.

3. Make sure that the choke lever is open.

4. Stump the pedal with your right foot, and hold the top of the unit

cover with left hand to prevent the engine from moving.

5. Pull out slowly the starter handle till feeling compression. Then

pull it strongly.

6. When the engine is difcult to start, open the throttle by about

1/3.

Stopping the engine

For tube throttle model: Release the throttle trigger and then set the

stop control lever to “O” position.

► 1. Throttle trigger 2. Stop control lever

For hip throttle model: Set the throttle lever to the low speed posi-

tion to reduce the engine speed. Then set the stop switch to “O”

position.

► 1. Throttle lever 2. Stop switch

Prevention from carburetor icing

NOTICE: When environmental temperature is higher than

10°C, always return the lever to normal (sun mark) setting.

Otherwise the engine may be damaged by overheating.

When the environmental temperature is low and humidity is high,

water vapor may freeze inside the carburetor and the engine drives

unsteadily (carburetor icing). Change the setting of the anti icing lever

as follows if necessary.

Environment temperature is higher than 10°C: Turn the lever to nor-

mal position (sun mark).

Environment temperature is equal or lower than 10°C: Turn the lever

to anti-icing position (snow mark).

Adjusting shoulder strap

1. Adjust the shoulder strap to a length that is comfortable to work

while carrying the blower.

To fasten the strap, pull the end of the strap downwards.

► 1. Shoulder strap

To loosen the strap, pull up the end of the fastener.

► 1. Fastener

2. Pull the stabilizer strap until there are no space left between your

back and the blower housing.

To fasten the strap, pull the end of the strap downwards.

10 ENGLISH

Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

Forumrules

To achieve meaningful questions, we apply the following rules:

First, read the manual;
Check if your question has been asked previously;
Try to ask your question as clearly as possible;
Did you already try to solve the problem? Please mention this;
Is your problem solved by a visitor then let him/her know in this forum;
To give a response to a question or answer, do not use this form but click on the button 'reply to this question';
Your question will be posted here and emailed to our subscribers. Therefore, avoid filling in personal details.

new questions and answers
new manuals

You will receive an email to register for one or both of the options.

Get your user manual by e-mail

Enter your email address to receive the manual of Makita EB7660TH in the language / languages: English, German, Dutch, Danish, French, Italian, Portuguese, Turkish, Spanish as an attachment in your email.

The manual is 42,51 mb in size.

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.

Info

Makita EB7660TH Manual

Product: