Manual Makita EB7660TH (page 9 of 172) (English, German, Dutch, Danish, French, Italian, Portuguese, Turkish, Spanish)

690563

Zoom out

Zoom in

1/172

OPERATION

Starting the engine

WARNING: Never attempt engine start in a place where the

fuel has been supplied. It may cause ignition or re. When starting

the engine, keep a distance of at least 3 meters from fuelling place.

WARNING: Exhaust gas from the engine is toxic. Do not

operate the engine in a poorly-ventilated place, such as in a

tunnel, building, etc. Operating the engine in the poorly-ventilated

place may cause poisoning by exhaust gas.

WARNING: In case of detection of any abnormality in

sound, odor, vibration after starting, stop the engine immedi-

ately and carry out inspection. If the engine is operated without

attending such abnormality, an accident may occur.

WARNING: Do not touch hot engine cover. Otherwise skin

burn may result.

WARNING: Make sure that there is no fuel leakage before

starting the engine.

WARNING: Make sure that the engine stops when the stop

switch is set to “O” position.

When the engine is cold or after refuelling (cold start)

1. Put the blower on a at surface.

2. I / O position

For tube throttle model: Set the stop control lever to “I” position.

► 1. Stop control lever

For hip throttle model: Set the stop switch to “I” position. And make

sure that the throttle lever is set to low speed position.

► 1. Stop switch 2. Throttle lever

3. Continue to push the primer pump until fuel comes into the

primer pump.

► 1. Primer pump 2. Choke lever

NOTE: In general, fuel comes into the carburetor by 7 to 10 pushes.

NOTE: Even the primer pump is pushed excessively, an excess of

gasoline returns to the fuel tank.

4. Lift the choke lever to the closed position.

5. Stump the pedal with your right foot, and hold the top of the unit

cover with left hand to prevent the engine from moving.

6. Pull out slowly the starter handle till feeling compression. Then

pull it strongly.

NOTICE: Never pull the rope to the full extension.

NOTICE: Return the starter knob gently into the housing.

Otherwise released starter knob may hit your body or it may not

rewind appropriately.

NOTE: If the engine res and stops, return the choke lever to

the “OPEN” position and pull the starter handle several times

to start the engine again.

7. When the engine starts, down the choke lever to open position.

NOTE: Open the choke lever fully before pulling the throttle.

NOTE: In cold temperature or when the engine is not warm enough,

never open the choke lever suddenly. Otherwise, the engine may

stop.

8. Warm-up for 2 to 3 minutes with engine speed idle or low.

9 ENGLISH

Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

Forumrules

To achieve meaningful questions, we apply the following rules:

First, read the manual;
Check if your question has been asked previously;
Try to ask your question as clearly as possible;
Did you already try to solve the problem? Please mention this;
Is your problem solved by a visitor then let him/her know in this forum;
To give a response to a question or answer, do not use this form but click on the button 'reply to this question';
Your question will be posted here and emailed to our subscribers. Therefore, avoid filling in personal details.

new questions and answers
new manuals

You will receive an email to register for one or both of the options.

Get your user manual by e-mail

Enter your email address to receive the manual of Makita EB7660TH in the language / languages: English, German, Dutch, Danish, French, Italian, Portuguese, Turkish, Spanish as an attachment in your email.

The manual is 42,51 mb in size.

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.

Info

Makita EB7660TH Manual

Product: