690563
5
Zoom out
Zoom in
Previous page
1/172
Next page
7. Never refuel in closed rooms. Fuel vapors accumulate at
ground level (risk of explosions).
8. Only transport and store fuel in approved containers. Make
sure stored fuel is not accessible to children.
9. Do not attempt to refuel a hot or a running engine.
10. Do not refuel more than the amount dened in
“SPECIFICATIONS”.
Method of operation
1. Use the blower only in good light and visibility. Beware of
slippery or wet areas, ice and snow (risk of slipping), and
narrow space. Always ensure a safe footing.
2. Never work on unstable surfaces or steep terrain.
3. Do not work from ladders or high places. Otherwise it may
result in personal injury.
4. To reduce the risk of personal injury, do not direct air blast
towards bystanders, since the high pressure of the air ow
could injure eyes and could blow small objects at great
speed.
5. Never insert any foreign object into the air intake of the
machine or into the nozzle of the blower. It will damage the
fan wheel and may cause serious injury to the operator or
bystanders as a result of the object or broken parts being
thrown out at high speed.
6. Pay attention to the direction of the wind, i.e., do not work
against the wind.
7. To reduce the risk of stumbling and loss of control, do not
walk backward while operating the machine.
8. Always shut off the engine before cleaning or servicing the
unit or replacing parts.
9. Take a rest to prevent loss of control caused by fatigue. We
recommend to taking a 10 to 20-minute rest every hour.
10. Do not operate the machine near the windows, etc.
11. To reduce damage from vibration and/or damage to the ears,
operate the machine at low speed if possible and limit the
time of operation.
12. Operate the machine only at reasonable hours. Do not oper-
ate the blower in the morning or late at night when people
might be disturbed.
13. It is recommended for using rakes and brooms to loosen
debris before blowing.
14. Before blowing, slightly dampen surfaces in dusty condi-
tions or use water mist sprayer if necessary.
15. Adjust the length of the blower nozzle so that the stream
can work close to the ground.
16. To reduce sound levels, limit the number of pieces of equip-
ment used at any one time.
17. After using blowers and other equipment, CLEAN UP!
Dispose of debris in trash receptacles.
18. Do not accelerate the engine more than necessary. Blown
object may result in personal injury.
19. The exhaust mufer becomes hot during the operation. Do
not touch hot exhaust mufer, skin burn may result.
20. Do not operate the machine in explosive atmospheres, such
as in the presence of ammable liquids, gases or dust. The
machine creates sparks which may ignite the dust or fumes.
Maintenance instructions
1. Be kind to the environment. Operate the blower with as little
noise and pollution as possible. In particular, check the cor-
rect adjustment of the carburetor.
2. Clean the blower at regular intervals and check that all
screws and nuts are securely tightened.
3. Never service or store the blower in the vicinity of open
ames, sparks, etc.
4. Always store the blower in a well-ventilated locked room
and with the fuel tank emptied.
5. The performance of maintenance or repair work by the user
is limited to those activities as described in this instruction
manual. All other work is to be done by Authorized Service
Agents.
6. Use only genuine spare parts and accessories supplied by
Makita. Use of non-approved accessories and tools may
result in accidents and injuries. Makita will not accept any
liability for accidents or damage caused by the use of any
non-approved attachment or accessories.
7. Incorrect repair and poor maintenance can shorten the life
of the equipment and increase the risk of accidents.
First aid
1. In case of accident make sure that a well-stocked rst-aid kit is
available in the vicinity of the operations. Immediately replace
any item taken from the rst aid kit.
2. When asking for help, give the following information:
Place of the accident
What happened
Number of injured persons
Nature of the injury
Your name
5 ENGLISH
5


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Makita EB7660TH at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Makita EB7660TH in the language / languages: English, German, Dutch, Danish, French, Italian, Portuguese, Turkish, Spanish as an attachment in your email.

The manual is 42,51 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info