Manual Makita EB7660TH (page 4 of 172) (English, German, Dutch, Danish, French, Italian, Portuguese, Turkish, Spanish)

690563

Zoom out

Zoom in

1/172

Intended use

The tool is intended for blowing dust.

Starting up the blower

1. Make sure that there are no children or other people within

a working range of 15 meters, also pay attention to any ani-

mals near by.

2. Before operating, always check that the blower is safe for

operation:

— Check the security of the throttle lever. The throttle

lever should be checked for smooth and easy action.

— Check for proper functioning of the throttle lever lock.

— Check for clean and dry handles and test the function of

the l-O switch. Keep handles free of oil and fuel.

3. Start the Blower only in accordance with the instructions.

Do not use any other methods for starting the engine.

4. Use the blower and the tools supplied only for applications

specied.

5. Start the blower engine only after the entire tool has been

assembled. Operation of the tool is permitted only after all

the appropriate accessories are attached.

6. The engine is to be switched off immediately if there are any

engine problems.

7. When working with the blower, always wrap your ngers

tightly around the handle, keeping the control handle cra-

dled between your thumb and forenger. Keep your hand

in this position to have your machine under control at all

times. Make sure your control handle is in good condition

and free of moisture, pitch, oil or grease.

8. Always ensure a safe, well-balanced footing.

9. Carry the blower properly on both shoulders during opera-

tion. Do not carry the blower with only one shoulder strap.

Otherwise personal injury may result.

10. Operate the blower in such a manner as to avoid inhalation

of the exhaust gases. Never run the engine in enclosed

rooms (risk of suffocation and gas poisoning). Carbon mon-

oxide is an odorless gas. Always ensure there is adequate

ventilation.

11. Switch off the engine when resting or leaving the blower

unattended. Place it in a safe location prevent danger to

others, setting re to combustible materials, or damage to

the machine.

12. Never lay the hot blower onto dry grass or onto any com-

bustible materials.

13. All protective parts and guards supplied with the machine

must be used during operation.

14. Never operate the engine with a faulty exhaust mufer.

Transport

1. Shut off the engine during transport.

2. Position the blower safely during car or truck transportation

to avoid fuel leakage.

3. When transporting the blower, ensure that the fuel tank is

completely empty.

4. Lift the blower with holding carry handle when you carry it.

Do not drag the blower by nozzle, pipe or other parts.

5. Hold the blower rmly during transportation.

6. When transport the blower, bend your knee and make sure

you do not damage your shoulder and lower back.

Refuelling

1. Shut off the engine during refuelling, keep well away from

open ame and do not smoke.

2. Avoid skin contact with petroleum products. Do not inhale

fuel vapor. Always wear protective gloves during refuelling.

Change and clean protective clothing at regular intervals.

3. Take care not to spill either fuel or oil in order to prevent soil

contamination (environmental protection). Clean the blower

immediately after fuel has been spilt. Allow wet cloths to dry

before disposing in properly, covered container to prevent

spontaneous combustion.

4. Avoid any fuel contact with your clothing. Change your

clothing immediately if fuel has been spilled on it (re

hazard).

5. Inspect the fuel cap at regular intervals making sure that it

stays securely fastened.

6. Carefully tighten the locking screw of the fuel tank. Change

locations to start the engine (at least 3 meters (10 ft) away

from the place of refuelling).

4 ENGLISH

Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

Forumrules

To achieve meaningful questions, we apply the following rules:

First, read the manual;
Check if your question has been asked previously;
Try to ask your question as clearly as possible;
Did you already try to solve the problem? Please mention this;
Is your problem solved by a visitor then let him/her know in this forum;
To give a response to a question or answer, do not use this form but click on the button 'reply to this question';
Your question will be posted here and emailed to our subscribers. Therefore, avoid filling in personal details.

new questions and answers
new manuals

You will receive an email to register for one or both of the options.

Get your user manual by e-mail

Enter your email address to receive the manual of Makita EB7660TH in the language / languages: English, German, Dutch, Danish, French, Italian, Portuguese, Turkish, Spanish as an attachment in your email.

The manual is 42,51 mb in size.

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.

Info

Makita EB7660TH Manual

Product: