599865
18
Zoom out
Zoom in
Previous page
1/172
Next page
18
2. Cleaning of air cleaner
WARNING: INFLAMMABLES STRICTLY PROHIBITED
Interval of Cleaning and Inspection: Daily (every 10 operating hours)
(1) Loosen the bolts (1).
(2) Remove the air cleaner cover (2).
(3) Remove the element (3) and clean off any dirt from the element
with the brush.
Note:
The element is a dry type and should not get wet. Never wash
with water.
(4) Replace the element with a new one if it is damaged or very
dirty.
(5) Wipe off any oil that has come in to contact with the breather (4)
with a rag or cloth.
(6) Install the element in the air cleaner case.
(7) Attach the air cleaner cover and tighten the knob bolt.
NOTICE:
Clean the element several times a day, if excessive dust adheres to it.
If operation continues with the element remaining not cleared of oil, oil in
the air cleaner may fall outside, resulting in oil contamination.
3. Checking the spark plug
CAUTION:
Do not touch the spark plug while the engine is running. Otherwise
electrical shock may result.
Set the stop control lever/stop switch to OFF “O” position.
Check the spark plug cord regularly. If it is damaged or torn, replace it.
Otherwise electrical shock may result.
When removing the spark plug, clean the spark plug and cylinder head
first, so that no dirt, sand, etc will enter the cylinder.
Remove the spark plug after the engine has cooled down in order to
avoid damaging the threaded hole in the cylinder.
Install the spark plug properly into the threaded hole. If installed at an
angle, the threaded hole in the cylinder will get damaged.
(1) Opening/closing the plug cover
To open (A) the plug cover (1), lift it and make a half turn of it. To
close (B) the plug cover, make a half turn of it, and press around
the dented part.
(2) Removing the spark plug
Use an attached box wrench to remove or install the spark
plug.
(3) Checking the spark plug
The clearance between two electrodes of spark plug is 0.7 to
0.8 mm. Adjust to the correct clearance when it is too wide or
too narrow.
Clean thoroughly or replace the spark plug if it has accumulated
carbon or contaminated.
(4) Replacing the spark plug
For replacement, use NGK-CMR6A.
(1)
(A) (B)
(1)
0.7 - 0.8 mm
(2)
(3)
(4)
(1)
18


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Makita EB7650TH at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Makita EB7650TH in the language / languages: English, German, Dutch, Danish, French, Italian, Portuguese, Spanish as an attachment in your email.

The manual is 6,78 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info