Manual Makita DPO600 (page 9 of 68) (English, German, Dutch, Danish, French, Italian, Portuguese, Turkish, Spanish)

691391

Zoom out

Zoom in

1/68

9 ENGLISH

Electronic function

Thetoolsequippedwithelectronicfunctionareeasyto

operate because of the following features.

Constant speed control

Possibletogetnenish,becausetherotatingspeedis

kept constant even under the loaded condition.

Soft start feature

Soft start because of suppressed starting shock.

ASSEMBLY

CAUTION: Always be sure that the tool is

switched off and the battery cartridge is removed

before carrying out any work on the tool.

Installing the backing pad

►Fig.10: 1. Hex wrench 2. Bolt 3. Backing pad

Put the backing pad on the shaft then turn the bolt

clockwise with a hex wrench.

CAUTION: Make sure that the backing pad is

secured properly. Loose attachment will run out of

balanceandcauseanexcessivevibrationwhichmay

cause loss of control.

Installing side grip

Optional accessory

CAUTION: Tighten the caps or side grip

rmly.Otherwise,thefrontcovermayfallandcause

aninjury.

►Fig.11: 1. Cap 2. Side grip

Remove the cap and screw the side grip on the tool

securely.

The side grip can be installed on either side of the tool.

Installing or removing pad

Optional accessory

CAUTION: Only use hook-and-loop system

pads for polishing.

►Fig.12: 1. Pad

Toinstallthepad,rstremovealldirtandforeignmat-

terfromthehook-and-loopsystemofthepadandthe

backing pad. Attach the pad to the backing pad so that

their edges are aligned.

Toremovethepadfromthebackingpad,justpullup

from its edge.

CAUTION: Make sure that the pad and

backing pad are aligned and securely attached.

Otherwise the pad will cause an excessive vibration

whichmaycauselossofcontrolorthepadmaybe

thrown out from the tool.

OPERATION

CAUTION: Only use Makita genuine pads for

polishing (optional accessories).

CAUTION: Make sure the work material is

secured and stable. Falling object may cause

personal injury.

CAUTION: Hold the tool rmly with one hand

on the switch handle and the other hand on the

front grip (or side handle) when performing the

tool.

CAUTION: Do not run the tool at high load

over an extended time period.Itmayresultintool

malfunctionwhichcauseselectricshock,reand/or

seriousinjury.

CAUTION: Be careful not to touch the rotating

part.

CAUTION: Before operating the tool, make

sure that the side grip or caps are not loose. If the

sidegriporcapsareloose,thefrontcovermayfall

andcauseaninjury.

NOTICE: Never force the tool. Excessive pressure

mayleadtodecreasedpolishingefciency,damaged

pad, or shorten tool life.

NOTICE: Continuous operation at high speed

may damage work surface.

Polishing operation

►Fig.13

1. Surfacetreatment(Randomorbitwithforced

rotationmode)

Useawoolpadforroughnishingthenuseasponge

padfornenishing.

2. Applyingwax(Randomorbitmode)

Useaspongepad.Applywaxtothespongepador

work surface. Run the tool at low speed to smooth out

wax.

CAUTION: Do not apply excessive wax or

polishing agent.Itwillgeneratemoredustandmay

causeeyeorrespiratorydiseases.

NOTE: First, perform a test waxing on an inconspic-

uous portion of the work surface. Make sure that the

tool will not scratch the surface or result in uneven

waxing before.

3. Removingwax(Randomorbitmode)

Use another sponge pad. Run the tool to remove wax.

4. Polishing(Randomorbitmode)

Applyafeltpadgentlytotheworksurface.

Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

Forumrules

To achieve meaningful questions, we apply the following rules:

First, read the manual;
Check if your question has been asked previously;
Try to ask your question as clearly as possible;
Did you already try to solve the problem? Please mention this;
Is your problem solved by a visitor then let him/her know in this forum;
To give a response to a question or answer, do not use this form but click on the button 'reply to this question';
Your question will be posted here and emailed to our subscribers. Therefore, avoid filling in personal details.

new questions and answers
new manuals

You will receive an email to register for one or both of the options.

Get your user manual by e-mail

Enter your email address to receive the manual of Makita DPO600 in the language / languages: English, German, Dutch, Danish, French, Italian, Portuguese, Turkish, Spanish as an attachment in your email.

The manual is 14,42 mb in size.

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.

Info

Makita DPO600 Manual

Product: