691826

Makita DPB182 Manual

9
Zoom out
Zoom in
Previous page
1/64
Next page
9 ENGLISH
Forstablecut,alwayskeepatleasttwoteethinthecut.
►Fig.10
Applythebandsawbladetothesuitablecuttingposi-
tion on the workpiece as illustrated.
►Fig.11
1. Holdthetoolwithbothhandsasillustrated.
Before turning on the tool, always make sure that the
stopperplatecontactstheworkpieceandthebandsaw
bladeisclearoftheworkpiece.
►Fig.12
2. Turnthetoolonandwaituntilthebandsawblade
attainsfullspeed.Gentlylowerthebladeintothecut.
The weight of the tool or slightly pressing the tool will
supply adequate pressure for the cutting. Do not force
the tool.
►Fig.13
3. Asyoureachtheendofacut,releasepres-
sure and lift it slightly so that it will not fall against the
workpiece.
NOTICE: Applying excessive pressure to the
tool or twisting of the band saw blade may cause
bevel cutting or damage to the blade.
NOTICE: When not using the tool for a long
period of time, remove the band saw blade from
the tool.
NOTICE: If the tool is operated continuously
until the battery cartridge has discharged, allow
the tool to rest for 15 minutes before proceeding
with a fresh battery.
Adjusting blade track
Whenthebandsawbladetendstoslipoutfromthe
wheel,adjustthebladetrack.
Toadjust,insertthehexwrenchintotheadjustment
hole as illustrated and make a quarter turn clockwise.
Afterthat,checkifthebandsawbladedoesnotslipout.
If it still slips out, make another quarter turn and check
untilthebandsawbladedoesnotslipout.
►Fig.14: 1. Hex wrench 2.Adjustmenthole
Cutting lubricant
CAUTION: Never use cutting oil or apply
excessive amount of wax to the band saw blade. It
maycausethebladetosliporcomeoffunexpectedly.
CAUTION: When cutting cast iron, do not use
any cutting wax.
When cutting metals, use Makita cutting wax as a cut-
tinglubricant.Toapplythecuttingwaxtotheteethof
thebandsawblade,removeacapofthecuttingwax,
start the tool and cut into the cutting wax as illustrated.
►Fig.15: 1. Cutting wax
MAINTENANCE
CAUTION: Always be sure that the tool is
switched off and the battery cartridge is removed
before attempting to perform inspection or
maintenance.
NOTICE: Never use gasoline, benzine, thinner,
alcohol or the like. Discoloration, deformation or
cracks may result.
TomaintainproductSAFETYandRELIABILITY,
repairs,anyothermaintenanceoradjustmentshould
beperformedbyMakitaAuthorizedorFactoryService
Centers, always using Makita replacement parts.
Cleaning
CAUTION: Wax and chips on the rubber tires
on the wheel may cause the band saw blade to
slip and come off unexpectedly. Use a dry cloth to
remove wax and chips from the rubber tires.
Afteruse,removewax,chipsanddustfromthetool,
rubbertiresonthewheelandthebandsawblade.
Replacing rubber tires on the
wheels
Replacetherubbertireswhenthebandsawbladeslips
ordoesnottrackproperlybecauseofbadlyworntires.
Toreplacetherubbertire,askfortheMakitaAuthorized
orFactoryServiceCenters.
OPTIONAL ACCESSORIES
CAUTION: These accessories or attachments
are recommended for use with your Makita tool
specied in this manual. The use of any other
accessories or attachments might present a risk of
injurytopersons.Onlyuseaccessoryorattachment
for its stated purpose.
If you need any assistance for more details regard-
ing these accessories, ask your local Makita Service
Center.
• Makitagenuinebatteryandcharger
• Bandsawblades
• Hex wrench 4
• Cutting wax
• Hook
• Wheel cover
NOTICE: When opening the wheel cover, open
and release both the hooks simultaneously.
Opening only one hook may cause crack on the
wheel cover.
►Fig.16: 1. Wheel cover 2. Hook
NOTE:Someitemsinthelistmaybeincludedinthe
tool package as standard accessories. They may
differ from country to country.
… 9 …


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Makita DPB182 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Makita DPB182 in the language / languages: English, German, Dutch, Danish, French, Italian, Portuguese, Turkish, Spanish as an attachment in your email.

The manual is 13,81 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info