Manual Makita DMR202 (page 8 of 17) (English, German, Dutch, Danish, French, Italian, Portuguese, Turkish, Spanish)

690931

Zoom out

Zoom in

1/17

7 ENGLISH

Pairing and playing your Bluetooth

device for the rst time

1. Press the Power button to turn on the speaker and

the ‘BT PAIR’ will appear on the display to show the

speaker is discoverable.

2. Activate Bluetooth on your device according to the

device's user manual to link to the speaker. Locate

the Bluetooth device list and select the device named

‘DMR202’ with some mobiles (which are equipped with

earlier versions than BT2.1 Bluetooth device), you may

need to input the pass code “0000”.

3. Once connected, there will be a beep sound and the

display will show ‘BT CONNECT’. You can simply

select and play any music from your source device.

Volume control can be adjusted from your source

device, or directly from the speaker.

4. Use the controls on your Bluetooth-enabled device or

on the speaker to play/pause and navigate tracks.

Note:

1. If 2 Bluetooth devices, pairing for the rst time, both

search for the speaker, it will show its availability on

both devices. However, if one device links with this unit

rst, then the other Bluetooth device won't nd it on the

list.

2. If your Bluetooth device is temporarily disconnected to

the speaker, then you need to manually reconnect your

device again to the speaker.

3. If ‘DMR202’ shows in your Bluetooth device list but

your device cannot connect with it, please delete the

item from your list and pair the device with the speaker

again following the steps described previously.

4. The effective operation range between the system and

the paired device is approximately 10 meters (30 feet).

Any obstacle between the system and the device can

reduce the operational range.

5. Bluetooth connectivity performance may vary

depending on the connected Bluetooth devices. Please

refer to the Bluetooth capabilities of your device before

connecting to the speaker. All features may not be

supported on some paired Bluetooth devices.

Playing audio les in Bluetooth mode

When you have successfully connected the speaker with

the chosen Bluetooth device you can start to play your

music using the controls on your connected Bluetooth

device.

1. Once playing has started adjust the volume to the

required setting using the Volume buttons

on the

speaker or on your enabled Bluetooth device.

2. When you press the Volume up/down button, the

volume indicator will ash in fast ashing red. If the

indicator light in solid red, it indicates the volume is in

maximum volume or minimum volume.

3. Use the controls on your device to play/pause and

navigate tracks. Alternatively, control the playback

using Play/Pause

, Next track , Previous track

buttons

on the speaker.

4. Press and hold the Next track

or Previous button

fast-forward/Rewind the current track. Release

the button when the desired point in the track is

reached.

Note:

1. That not all player applications or devices may respond

to all of these controls.

2. Some mobile phones may temporarily disconnect from

the speaker when you make or receive calls. Some

devices may temporarily mute their Bluetooth audio

streaming when they receive text messages, emails or

for other reasons unrelated to audio streaming. Such

behaviour is a function of the connected device and

does not indicate a fault with the speaker.

Speaker memory and reconnecting

a device

The speaker can memorize up to 8 sets of paired device,

when the memory exceed this amount, the oldest pairing

history will be over written. If your Bluetooth device

already paired with the speaker previously, the unit

will memorize your Bluetooth device and it attempts

to reconnect with a device in memory which is last

connected. If the last connected device is not available,

the speaker will be discoverable.

Disconnecting your Bluetooth device

Press and hold the Bluetooth pairing button for 2-3

seconds to disconnect with your Bluetooth device. The

Bluetooth indicator ashes in blue indicating the speaker

is discoverable again for pairing.

Playing music via auxiliary input socket

A 3.5mm Auxiliary input socket is provided on the right

side of the unit to permit an audio signal to be fed into the

unit from any devices that features a headphone or audio

output, such as an iPod, MP3 or CD player.

1. Connect a stereo or mono audio source (for example,

iPod, MP3 or CD player) to the Auxiliary input socket

(marked 'AUX') and the Aux in indicator turns green

indicating the speaker is in auxiliary input mode.

2. Adjust the Volume control on your iPod, MP3 or CD

player to ensure an adequate signal and then adjust

the volume on the speaker for comfortable listening.

3. To have the better sound quality, we recommend

setting the volume to more than two-thirds level on

your audio device and then adjust the volume on the

speaker as required.

Note:

When Aux in socket is connected an audio device, the

speaker will be switched from Bluetooth to auxiliary input

mode. You can also press the source button to select your

desired mode.

Using USB memory devices

Important:

1. Your speaker is only designed to work with USB ash

memory devices. It is not intended to be connected to

hard disk drives or any other type of USB device.

2. It is possible to use SD or SDHC cards for media

playback when held in a suitable USB adaptor.

However, due to the wide variation of such adaptors,

Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

Forumrules

To achieve meaningful questions, we apply the following rules:

First, read the manual;
Check if your question has been asked previously;
Try to ask your question as clearly as possible;
Did you already try to solve the problem? Please mention this;
Is your problem solved by a visitor then let him/her know in this forum;
To give a response to a question or answer, do not use this form but click on the button 'reply to this question';
Your question will be posted here and emailed to our subscribers. Therefore, avoid filling in personal details.

new questions and answers
new manuals

You will receive an email to register for one or both of the options.

Get your user manual by e-mail

Enter your email address to receive the manual of Makita DMR202 in the language / languages: English, German, Dutch, Danish, French, Italian, Portuguese, Turkish, Spanish as an attachment in your email.

The manual is 5,18 mb in size.

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.

Info

Makita DMR202 Manual

Product: