Manual Makita DMR107 (page 6 of 72) (English, German, Dutch, Danish, French, Italian, Polish, Portuguese, Spanish)

657982

Zoom out

Zoom in

1/72

5. Preset stations

6. Scan tuning and Time set

7. Tuning/Volume control knob

8. DC IN socket

9. Input terminal (AUX IN1)

10. Soft bended rod antenna

11. Battery compartment (covering main battery pack and

back up batteries)

12. Handle

13. Speaker

14. Battery compartment locker

15. Main battery compartment

16. Back up battery compartment

17. Red indicator

18. Button

19. Battery cartridge

20. Input terminal (AUX IN2)

21. Front

22. Right

23. Back; Battery cover closed

24. Back; Battery cover opened

25. Indicator lamps

26. Check button

LCD display:

A. Radio alarm

B. HWS buzzer alarm

C. Scan tuning

D. Band Indicator

E. Low battery indicator

F. Preset stations

G. Sleep and Snooze status

H. Frequency

I. Stereo symbol and Volume

J. Clock

K. Time set

L. PM for clock

Battery installation

Note:

Keeping back up batteries inside the compartment

prevent stored data in preset memories from being lost.

Back up battery installation

1. Pull out the battery compartment locker to release

battery compartment. There are main battery pack

compartment and back up battery compartment.

(Fig. 2 & 3)

2. Remove back up battery compartment cover and

insert 2 fresh UM-3 (AA sizes). Make sure the

batteries are with correct polarity as shown inside the

compartment. Replace the battery cover.

3. After back up batteries are inserted, insert the main

battery pack to power radio. The suitable battery

packs for this radio listed as the following table.

The following tables indicate the operating time on a

single charge.

: Cluster Battery

: Slide Battery

Note:

Table regarding to the battery operating time above is for

reference. The actual operating time may differ with the

type of the battery, charging condition, or usage

environment.

Installing or removing Slide battery

cartridge (Fig. 4 & 5)

• To install the battery cartridge, align the tongue on the

battery cartridge with the groove in the housing and slip

it into place. Always insert it all the way until it locks in

place with a little click.

• If you can see the red indicator on the upper side of the

button, it is not locked completely. Install it fully until the

red indicator cannot be seen. If not, it may accidentally

fall out of the tool, causing injury to you or someone

around you.

• Do not use force when installing the battery cartridge. If

the cartridge does not slide in easily, it is not being

inserted correctly.

• To remove the battery cartridge, slide it from the tool

while sliding the button on the front of the cartridge or

pressing the buttons on both sides of the cartridge.

Installing or removing Cluster battery

cartridge (Fig. 6 & 7)

• Pull the supporting bar to allow the battery to insert to

the terminal.

• To insert the battery cartridge, align the tongue on the

battery cartridge with the groove in the housing and slip

it into place.

• Release the supporting bar.

Battery

capacity

Battery Cartridge Voltage

At speaker

output =

50 mW + 50 mW

(Unit: Hour)

(Approximately)

7.2 V 10.8 V 14.4 V 18 V

1.0 Ah BL7010 7

1.3 Ah

BL1013 8.5

BL1415 BL1815 9

1.5 Ah

BL1015 9.5

BL1415N BL1815N 10

2.0 Ah

BL1020B 13

BL1820/

BL1820B

3.0 Ah

BL1430 20

BL1830/

BL1830B

4.0 Ah

BL1040B 26

BL1440 27

BL1840/

BL1840B

5.0 Ah

BL1450 34

BL1850/

BL1850B

6.0 Ah BL1860B 42

How do I set the time on my dmr107 Mikita radio
Submitted on 28-4-2022 at 11:23
Reply Report abuse

Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

Forumrules

To achieve meaningful questions, we apply the following rules:

First, read the manual;
Check if your question has been asked previously;
Try to ask your question as clearly as possible;
Did you already try to solve the problem? Please mention this;
Is your problem solved by a visitor then let him/her know in this forum;
To give a response to a question or answer, do not use this form but click on the button 'reply to this question';
Your question will be posted here and emailed to our subscribers. Therefore, avoid filling in personal details.

new questions and answers
new manuals

You will receive an email to register for one or both of the options.

Get your user manual by e-mail

Enter your email address to receive the manual of Makita DMR107 in the language / languages: English, German, Dutch, Danish, French, Italian, Polish, Portuguese, Spanish as an attachment in your email.

The manual is 8,86 mb in size.

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.

Info

Makita DMR107 Manual

Product: