600293
9
Zoom out
Zoom in
Previous page
1/88
Next page
9
LCD Display:
A. Radio alarm
B. HWS buzzer alarm
C. Scan tuning
D. Band Indicator
E. Low battery indicator
F. Preset stations
G. Sleep and Snooze status
H. Frequency
I. Stereo symbol and Volume
J. Clock
K. Time set
L. PM for clock
Battery Installation
Note:
Keeping back up batteries inside the compartment
prevent stored data in preset memories from being lost.
1. Pull out the battery compartment locker to release
battery compartment. There are main battery pack
compartment and back up battery compartment.
(Fig. 2 & 3)
2. Remove back up battery compartment cover and
insert 2 fresh UM-3 (AA sizes). Make sure the
batteries are with correct polarity as shown inside the
compartment. Replace the battery cover.
3. After back up batteries are inserted, insert the main
battery pack to power radio. The suitable battery
packs for this radio listed as the following table.
The following tables indicate the operating time on a single charge.
: Cluster Battery
: Slide Battery
3-1. Installing or removing Slide battery cartridge (Fig. 4)
To install the battery cartridge, align the tongue on the
battery cartridge with the groove in the housing and slip
it into place. Always insert it all the way until it locks in
place with a little click.
If you can see the red indicator on the upper side of the
button, it is not locked completely. Install it fully until the
red indicator cannot be seen. If not, it may accidentally
fall out of the tool, causing injury to you or someone
around you.
Do not use force when installing the battery cartridge. If
the cartridge does not slide in easily, it is not being
inserted correctly.
Battery Cartridge Voltage
AT SPEAKER OUTPUT=
50 mW + 50 mW
unit: Hour
7.2 V 9.6 V 10.8 V 12 V 14.4 V 18 V
BL7010 Approx. 7.0
PA09 PA12 PA14 PA18
Approx. 8.0
9050 1250 1450 1850
9100 1200 1420
BL1815
9120 BL1013 1220
BL1415
9100A 1200A
BL1815N Approx. 10.0
9102 1202 1422 1822
Approx. 12.5
9122 1222
BH1420
9102A 1202A
BH9020 BH1220
BH9020A BH1200C
9134 1234 1434 1834 Approx. 16.5
BH1427 Approx. 17.0
9135 1235 1435 1835
Approx. 19.01435F
BL1830
1235F
BL1430
BH9033 BH1233 BH1433
Approx. 21.0
BH9033A BH1233C
BL1440 BL1840 Approx. 27.0
WARNING:
Do not use two main batteries at the same time.
9


Need help? Post your question in this forum.

Forumrules
1

Forum

makita-dmr102

Reset search

  • My radio keeps switching off then showing a symbol in screen E backwards simular to a 3.
    Whats going on ?
    Submitted on 26-11-2022 at 07:03

    Reply Report abuse


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Makita DMR102 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Makita DMR102 in the language / languages: English, German, Dutch, Danish, French, Italian, Polish, Portuguese, Swedish, Spanish, Norwegian, Finnish as an attachment in your email.

The manual is 1,6 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info