600450
6
Zoom out
Zoom in
Previous page
1/60
Next page
6
LED indicator / Beeper
For LED#A (Fig. 5)
Led indicator / Beeper on the tool shows the following functions.
007930
Status of
the LED indicator/beeper
Function Status Action to be taken
LED indicator Beeper
Lights up in
Green
Red
Blue
White in order.
A series of
very short
beeps
Check LED#A,
light and beeper
(when pulling
switch trigger for
the first time after
installing a battery
cartridge into the
tool)
Make sure that green, red, blue, white
LED lights up and beeper beeps
properly.
__
Blinks in
purple slowly.
A series of
long beep
Warning for
battery cartridge
capacity
This indicates the appropriate time to
replace the battery cartridge when the
battery power becomes low.
Replace the battery
with fully charged
one.
Lights up in
purple.
A long beep
Checking the
remaining battery
capacity, Autostop
This function works when the battery
power is almost used up. At this time,
tool stops immediately.
Replace the battery
with fully charged
one.
Lights up in
red and green
alternatively.
A series of
short beeps
Anti-reset of
controller
This function works when an abnormal
drop of the battery voltage occurs for
some reason, and the tool stops.
Replace the battery
with fully charged
one.
Failure of motor This function works when motor fails.
Take it to a Makita
Authorized Service
centers.
Blinks in red
quickly.
A series of
short beeps
Overheat
This function works when the
temperature of the controller or motor
goes up very highly, and the tool stops.
Remove the battery
cartridge immediately
and cool the tool
down.
Green (blue
when batch is
completed in
tool stand-
alone mode)
Auto-stop
fastening
This function works when the tool has
reached within the fastening torque
range preset on PC and normal
tightening has been completed. (Note)
__
Lights up in
red.
A long beep
Result of torque
judgment: NOK
(High)
This function works when the tool has
reached above the fastening torque
range preset on PC. (Note)
__
Lights up in
yellow.
A long beep
Result of torque
judgment: NOK
(Low)
This function works when the tool has
reached below the fastening torque
range preset on PC. (Note)
__
6


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Makita DFT124R at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Makita DFT124R in the language / languages: English, German, Dutch, Danish, French, Italian, Portuguese, Spanish as an attachment in your email.

The manual is 1,21 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info