793613
11
Zoom out
Zoom in
Previous page
1/124
Next page
11 ENGLISH
TOOL SETTINGS
CAUTION: Make sure to adjust tool settings
according to your applications and preferences
before use.
CAUTION: Perform trial fastening, using a
torque checker etc., if necessary, so as to verify if
the updated settings are successfully applied.
NOTICE: Install the application software
designed for this tool in your computer before

time. For detailed information, refer to the installa-
tion manual supplied with the application software
designed for this tool.
A series of operation settings, including fastening
torque and no-load speed, can be adjusted via software
screen. Archiving and sharing tool preferences through
the software can enhance work performance.
Connecting with computer
NOTICE: Use the Makita genuine USB cable to
connect the tool with your computer.
1. Plug the USB cable into the USB port on your
computer.
2. Slide the USB cover open on top of the housing,
and then plug the other end of the USB cable into the
USB port on the tool.
Fig.8: 1. USB cover 2. USB cable 3. USB port
NOTE: The LED indicator on top of the rear display
-
ognizes the tool plugged into the USB port. Launch
the application software on your computer, and the
-
cation between the devices has been successfully
established.
NOTE: While connected to your computer, the LED

switch operation is available.
NOTE: Slide the USB cover close on top of the hous-
ing each time after disconnecting the USB cable from
the USB port on the tool.
11


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Makita DFT060T at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Makita DFT060T in the language / languages: English, German, Dutch, Danish, French, Italian, Portuguese, Turkish, Spanish as an attachment in your email.

The manual is 18.78 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info