448346
15
Zoom out
Zoom in
Previous page
1/54
Next page
15
- Use a special round file for chains for sharpening the chain.
3/8= dia. 4.0 mm, .325= dia. 4.8 / 4.5 mm. File the first
cutter half with a 4.8 mm dia. round file, the switch to a 4.5
mm dia. file. Normal round files are not appropriate for
this work. See "Accessories" for the order number.
- The file should cut only when pushed forwards (arrow).
Lift the file when leading it backwards.
- First sharpen the shortest cutter. The length of this cutter is
then the standerd for all other cutters of the chain.
- Always guide the file as in fig. D shown (chain 3/8= 90
0
and chain .325=10
0
).
- All cutters must be sharpened to the same angle, 30°.
Different angles result in a roughly, irregularly running
chain, increase wear and tear and cause chain beakage.
- The 85° front rake of the cutter results from the cut depth of
the round file. If the proper file is used in the right manner,
the correct front rake will be obtained automatically.
Files and how to work with them
Proper sharpening:
CAUTION:
Use only chains and guide bars designed for this saw
(see the Extract from the spare-parts list)!
- All cutters must be of the same length (dimension a).
Cutters with different lengths result in rough running of the
chain and can cause cracks in the chain.
- Minimum cutter length is 3 mm. Do not resharpen the chain
when the minimum cutter length has been reached; at this
point, the chain must be replaced (see the Extract from the
spare-parts list and "Replacing the chain").
- The depth of the cut is determined by the difference in
height between the depth limiter (round nose) and the
cutting edge.
- The best results are obtained with a depth-limiter depth of
0.65 mm (.025").
CAUTION:
Excessive depth increases the
risk of kickback!
The chain needs sharpening when:
- the sawdust from sawing humid wood looks like wood flour.
- the saw chain penetrates the wood only under great
pressure.
- the cutting edge is visibly damaged.
- the sawing device is pulled to the left or the right during the
sawing operation. The cause is an unequal sharpening of
the saw chain.
Important: Sharpen frequently, but without removing
too much metal!
Generally, 2-3 strokes of the file will be enough.
Have the chain resharpened in a service center when you
have sharpened it yourself several times.
A
B
0.65 mm
(.025")
0.65 mm
(.025")
C
MAINTENANCE
Sharpening the saw chain
When working on the saw chain you must always pull
out the power supply plug and wear protective gloves.
D
3/8
.325
DES 300, 350, 400
DES 380
min.
3 mm (0.11)
15


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Makita DES 300 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Makita DES 300 in the language / languages: English, Dutch, French as an attachment in your email.

The manual is 3,14 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of Makita DES 300

Makita DES 300 User Manual - German, Danish - 36 pages


The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info