Manual Makita DCL282F (page 13 of 84) (English, German, Dutch, Danish, French, Italian, Portuguese, Turkish, Spanish)

690517

Zoom out

Zoom in

1/84

13 ENGLISH

Disposing of dust

CAUTION: Empty the cleaner before it

becomes too full, or the suction force weakens.

CAUTION: When closing the front cover, be

careful not to pinch your ngers.

NOTICE: Never throw away the dust stopper

because it should be used whenever either the

dust bag or the paper lter is used.

NOTICE: When the dust bag/paper lter is not

inside of the cleaner, the front cover does not

close completely. Do not force to close the front

cover. It may result in deforming or breakage of

the tool.

NOTICE: When disposing of dust, also clean the

room for the dust bag/paper lter. The remaining

dust and dirt in the room may cause the sponge lter

to be clogged or the motor to be damaged.

Push the button to open the front cover. Opening it

until a click is heard allows a positive stop at that position.

► Fig.32: 1. Front cover 2. Button

2. Pull out both the orange-colored dust stopper and

dust bag/paper lter together at the same time.

► Fig.33: 1. Dust stopper

3. Perform the procedures below depending on the

dust container type:

When using the dust bag

Remove the dust stopper and empty the dust bag.

► Fig.34: 1. Dust stopper 2. Dust bag

When using the paper lter

Remove the dust stopper and dispose of the paper lter.

► Fig.35: 1. Dust stopper 2. Paper lter

4. Place the dust bag/new paper lter and dust stop-

per together into the cleaner and close the front cover.

NOTE: The cleaner is constructed in such a way that

the front cover comes off when trying to force the

front cover open at the angle of more than 90°. If the

front cover comes off, insert it into the front cover joint

in place.

► Fig.36: 1. Front cover 2. Front cover joint

MAINTENANCE

CAUTION: Always be sure that the tool is

switched off and the battery cartridge is removed

before attempting to perform inspection or

maintenance.

To maintain product SAFETY and RELIABILITY,

repairs, any other maintenance or adjustment should

be performed by Makita Authorized or Factory Service

Centers, always using Makita replacement parts.

NOTICE: Never use gasoline, benzine, thinner,

alcohol or the like. Discoloration, deformation or

cracks may result.

After use

NOTICE: Putting the cleaner against the wall

without any other support cause the cleaner to

fall down and be damaged.

► Fig.37

Cleaning

Cleaner body

From time to time wipe off the outside (cleaner body) of

the cleaner using a cloth dampened in soapy water.

Clean out also the suction opening, dust bag/paper lter

mounting area and the dust stopper.

► Fig.38

Dust bag

Wash the dust bag in soapy water when it is clogged with

dust and the cleaner power becomes weak. Dry it out thor-

oughly before use. An insufciently dried lter may cause

poor suction and shorten the service life of the motor.

► Fig.39

NOTE: Paper lter is a throw-away type.

When the sponge lter is clogged with dust, remove it

from the cleaner and then wipe it off or wash in water.

Dust stopper

Wipe dust off from the dust stopper.

Remove dust and dirt on the sponge part by lightly tapping it.

► Fig.40: 1. Sponge part

Removing and installing the sponge lter

CAUTION: After cleaning sponge lter, be

sure to install it on the cleaner. If washed in water,

dry it up before installing. An insufciently dried

sponge lter may shorten the service life of the motor.

To remove the sponge lter, remove the dust bag or

paper lter and then pinch and take the sponge lter out.

► Fig.41: 1. Sponge lter

Press in the whole edge of the sponge lter against the

recessed wall inside the dust bag/paper lter mounting area.

► Fig.42: 1. Recessed wall

Wall mount for cordless cleaner

Optional accessory

NOTE:

The screw to mount the holder is not included.

Prepare a screw which ts with the material to screw into.

Attach the wall mount for cordless cleaner to a hard wooden wall,

beam or column, where the wall mount for cordless cleaner can

be rmly secured. Always be sure that the wall mount for cordless

cleaner is securely attached before hanging the cleaner.

► Fig.43: 1. Wall mount for cordless cleaner

CAUTION: Do not hang the cleaner to the wall

mount violently or hang other appliances than the

cleaner.

Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

Forumrules

To achieve meaningful questions, we apply the following rules:

First, read the manual;
Check if your question has been asked previously;
Try to ask your question as clearly as possible;
Did you already try to solve the problem? Please mention this;
Is your problem solved by a visitor then let him/her know in this forum;
To give a response to a question or answer, do not use this form but click on the button 'reply to this question';
Your question will be posted here and emailed to our subscribers. Therefore, avoid filling in personal details.

new questions and answers
new manuals

You will receive an email to register for one or both of the options.

Get your user manual by e-mail

Enter your email address to receive the manual of Makita DCL282F in the language / languages: English, German, Dutch, Danish, French, Italian, Portuguese, Turkish, Spanish as an attachment in your email.

The manual is 11,31 mb in size.

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.

Info

Makita DCL282F Manual

Product: