Manual Makita DCL282F (page 12 of 84) (English, German, Dutch, Danish, French, Italian, Portuguese, Turkish, Spanish)

690517

Zoom out

Zoom in

1/84

12 ENGLISH

5. Spread the cloth part of the dust bag inside the

cleaner.

► Fig.12

6. Close the front cover completely.

► Fig.13: 1. Front cover

Installing the paper lter

Use the dust stopper also when installing paper lter.

Be careful not to take the upper side for the lower side

by mistake because they are different each other.

► Fig.14: 1. Upper side of dust stopper 2. Lower side

of dust stopper

1. Unfold the entrance of the paper lter before

setting it on the dust stopper.

► Fig.15

2. Insert the protrusion of the paper lter into the

lower groove on the dust stopper as shown in the gure.

► Fig.16: 1. Dust stopper 2. Lower groove 3. Paper

lter

3. There is no distinction between the upper and

lower sides of the paper lter. You may insert its pro-

trusion of any side into the lower groove of the dust

stopper.

► Fig.17: 1. Lower groove

4. Overlap the frame of dust stopper with that of the

paper lter.

► Fig.18

5. Place the dust stopper and the paper lter

together into the cleaner cavity in the same direction of

arrow on the dust stopper. Insert them all the way into

the slots in the cleaner cavity.

► Fig.19

6. Spread the container part of the paper lter inside

the cleaner.

► Fig.20

7. Close the front cover completely.

► Fig.21: 1. Front cover

OPERATION

CAUTION: Do not move your face close to

the air vent when operating the cleaner. If foreign

objects are blown into eyes, it may result in personal

injury.

Installing or removing the cleaner

attachment

CAUTION: After installing attachment, check

if it is securely installed. If install attachment imper-

fectly, it may come off and cause personal injury.

CAUTION: Be careful not to hit your hand on

the wall etc. when removing the attachment.

When using the extension wand with

lock function

To install the extension wand, insert it to the suction

inlet of the cleaner until it clicks. Make sure that the

extension wand is locked.

► Fig.22: 1. Suction inlet 2. Extension wand 3. Hook

NOTE:

When installing the extension wand, be

sure to align the release button with the hook on

the extension wand. If they are not aligned, the wand

will not be locked and may come off from the cleaner.

NOTE:

When installing the extension wand without lock

function (optional accessory), twist and insert it to the suc-

tion inlet of the cleaner. To disconnect, twist and remove it.

► Fig.23

To remove, pull the extension wand while pushing the

release button.

► Fig.24: 1. Release button 2. Extension wand

When using the nozzle

To install the nozzle, twist and insert it securely to the

suction inlet of the cleaner or the end of extension

wand. To disconnect, twist and remove it.

► Fig.25

Cleaning (Suction)

Nozzle

Attach the nozzle to clean off tables, desks, furniture,

etc. The nozzle slips on easily.

► Fig.26: 1. Nozzle

Nozzle + Extension wand (Straight pipe)

The extension wand ts in between the nozzle and the

cleaner itself. This arrangement is convenient for clean-

ing a oor in a standing position.

► Fig.27: 1. Cleaner body 2. Extension wand

3. Nozzle

Corner nozzle

Fit on the corner nozzle for cleaning corners and crev-

ices of a car or furniture.

► Fig.28: 1. Corner nozzle 2. Cleaner body

Corner nozzle + Extension wand

(Straight pipe)

In tight quarters where the cleaner itself cannot squeeze

in, or in high places hard to reach, use this arrangement.

► Fig.29: 1. Corner nozzle 2. Extension wand

3. Cleaner body

Cleaning without nozzle

You can pick up powder and dust without nozzle.

► Fig.30

For picking up dust on a oor in a standing position, it is

convenient to attach the extension wand to the cleaner.

► Fig.31: 1. Extension wand

Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

Forumrules

To achieve meaningful questions, we apply the following rules:

First, read the manual;
Check if your question has been asked previously;
Try to ask your question as clearly as possible;
Did you already try to solve the problem? Please mention this;
Is your problem solved by a visitor then let him/her know in this forum;
To give a response to a question or answer, do not use this form but click on the button 'reply to this question';
Your question will be posted here and emailed to our subscribers. Therefore, avoid filling in personal details.

new questions and answers
new manuals

You will receive an email to register for one or both of the options.

Get your user manual by e-mail

Enter your email address to receive the manual of Makita DCL282F in the language / languages: English, German, Dutch, Danish, French, Italian, Portuguese, Turkish, Spanish as an attachment in your email.

The manual is 11,31 mb in size.

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.

Info

Makita DCL282F Manual

Product: