Manual Makita BUK360 (page 8 of 96) (English, German, Dutch, Danish, French, Italian, Portuguese, Turkish, Spanish)

600691

Zoom out

Zoom in

1/96

Save all warnings and instructions for

future reference.

Intended use

This equipment is intended for soil cultivation only.

Use the equipment for this purpose only. Using for

any other purposes may cause serious injury and/or

damage to the equipment.

Training/ Information

1. Do not insert key into the equipment until it is

ready to be used.

2. Be familiar with the controls and proper use of the

equipment.

3. Never allow children or people unfamiliar with the

instructions to use the machine. Local regulations

can restrict the age of the operator.

4. Never work while people, especially children, or

pets are nearby.

5. Do not operate the equipment while under the

influence of drugs, alcohol, or any medication.

6. Keep in mind that the operator or user is

responsible for accidents or hazards occurring to

other people or their property.

Preparation

1. While working, always wear substantial footwear

and long trousers. Do not operate the equipment

when barefoot or wearing open sandals.

2. Thoroughly inspect the area where the equipment

is to be used and remove all objects which can be

thrown up by the machine.

3. Before using, always visually inspect to see that

the tools are not worn out or damaged. Replace

worn out or damaged elements and bolts in sets to

preserve balance.

Operation

1. Work only in daylight or in good artificial light.

2. When working on slopes:

– Make sure that there are no children or other

people within a working range of 20 meters

(66 ft), also pay attention to any animals in the

working vicinity. Otherwise stop using the tool.

– always be sure of your footing,

– work across the slopes, never up and down,

– exercise extreme caution when changing

direction on slopes.

3. Do not work on excessively steep slopes.

4. Walk, never run with the machine.

5. Use extreme caution when reversing or pulling the

machine towards you.

6. Start the motor carefully according to

manufacturer instructions and with feet well away

from the tool(s).

7. Do not put your hands or feet near or under

rotating parts.

8. Never pick up or carry a machine while the motor

is running.

9. Switch off the equipment and remove the lock key

in the cases below:

– whenever you leave the machine unattended,

– before clearing blockages.

10. Pay particular attention on hard or stony field

because the machine tends to be much less stable

than on cultivated ground and use slow speed for

ploughing.

Maintenance and storage

1. Before storing the machine in a confined or closed

place, let it cool down for a sufficient period of

time.

2. Keep all nuts, bolts and screws tight to ensure the

equipment is in safe working condition.

3. To reduce the fire hazard, keep the motor, battery

compartment and storage area free of vegetative

material and excessive grease.

4. Switch off the equipment and remove the lock key

in the cases below:

– before checking, cleaning or working on the

machine,

– after striking a foreign object. Inspect the

machine for damage and make repairs before

restarting and operating the machine,

–

if the machine starts to vibrate abnormally.

Inspect for damage and replace or repair any

damaged parts. Check for and tighten any loose

parts.

Battery tool use and care

5. Recharge only with the charger specified by the

manufacturer. A charger that is suitable for one type

of battery pack may create a risk of fire when used

with another battery pack.

6. Use power tools only with specifically designated

battery packs. Use of any other battery packs may

create a risk of injury and fire.

7. When battery pack is not in use, keep it away from

other metal objects, like paper clips, coins, keys,

nails, screws or other small metal objects, that

can make a connection from one terminal to

another. Shorting the battery terminals together may

cause burns or a fire.

8. Under abusive conditions, liquid may be ejected

from the battery; avoid contact. If contact

accidentally occurs, flush with water. If liquid

contacts eyes, additionally seek medical help.

Liquid ejected from the battery may cause irritation or

burns.

Service

9. Have your power tool serviced by a qualified

repair person using only identical replacement

parts. This will ensure that the safety of the power tool

is maintained.

10. Follow instruction for lubricating and changing

accessories.

11. Keep handles dry, clean and free from oil and

grease.

SAVE THESE INSTRUCTIONS.

WARNING:

DO NOT let comfort or familiarity with product (gained

from repeated use) replace strict adherence to safety

rules for the subject product. MISUSE or failure to

follow the safety rules stated in this instruction

manual may cause serious personal injury.

Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

Forumrules

To achieve meaningful questions, we apply the following rules:

First, read the manual;
Check if your question has been asked previously;
Try to ask your question as clearly as possible;
Did you already try to solve the problem? Please mention this;
Is your problem solved by a visitor then let him/her know in this forum;
To give a response to a question or answer, do not use this form but click on the button 'reply to this question';
Your question will be posted here and emailed to our subscribers. Therefore, avoid filling in personal details.

new questions and answers
new manuals

You will receive an email to register for one or both of the options.

Get your user manual by e-mail

Enter your email address to receive the manual of Makita BUK360 in the language / languages: English, German, Dutch, Danish, French, Italian, Portuguese, Turkish, Spanish as an attachment in your email.

The manual is 2,61 mb in size.

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.

Info

Makita BUK360 Manual

Product: