691728
6
Zoom out
Zoom in
Previous page
1/56
Next page
6 ENGLISH
Rotate the change knob counterclockwise for random
orbit with forced rotation mode.
Random orbit mode
Fig.5: 1. Change knob
Random orbit mode is orbital action with free rotation of
thepadfornesanding.
Rotate the change knob clockwise for random orbit
mode.
Typical applications for sanding and
polishing
Sanding
Material Use Mode selection Speed
control
setting
Pad
Random
orbit
with
forced
rotation
Random
Paintwork
Sanding - 1 - 3 Soft
Repairs
(scratches,
rust spots)
2 - 3 Hard
Rough
paint
stripping
- 4 - 5 Soft
Plastics Soft
plastics
(PVC/
ABS)
1 - 3 Super
soft/
Soft
Hard
plastics
(FRP)
- 1 - 3 Soft/
Hard
Woods
Softwood
- 1 - 3 Super
soft/
Soft
Hardwood
3 - 5 Soft
Veneers -
1 - 2 Super
Soft
Metals Non-
ferrous
metal
(alumi-
num,
copper)
1 - 3 Soft
Steel
- 3 - 5 Soft/
Hard
Steel,
rust
removal
- 4 - 5 Super
Soft
Hard
metal
(stain-
less
steel)
- 4 - 5 Soft
Polishing
Use Mode
selection
Speed con-
trol setting
Pad
Applying wax Random orbit
with forced
rotation
2 - 4 Sponge pad
Removing
wax
Random orbit
with forced
rotation
4 - 5 Felt pad
Polishing Random orbit
with forced
rotation
4 - 5 Wool pad
The above information is intended only as a guide. In
each case, the most appropriate sanding disc grain
should be determined by preliminary trials.
Protector
Fig.6: 1. Protector
The protector prevents the pad, the tool housing and
the wall from being damaged when working near a wall.
Always use the protector when working.
To install the protector, align the tongue of the protector
with the groove, and push in the protector.
To remove the protector, pull the protector forward.
Fig.7: 1. Protector 2. Groove
ASSEMBLY
CAUTION: Always be sure that the tool is
switched off and unplugged before carrying out
any work on the tool.
Installing side grip
Fig.8: 1. Side grip
Screw the side grip on the tool securely.
The side grip can be installed on either side of the tool.
Installing or removing abrasive disc
CAUTION: Always use hook-and-loop system
abrasive discs. Never use pressure-sensitive
abrasive discs.
Fig.9: 1. Abrasive disc
To install the abrasive disc or the hook-and-loop type
pad(optionalaccessory),rstremovealldirtandfor-
eign matter from the pad.
Then attach the abrasive disc to the pad, using the
hook-and-loop system of the abrasive disc and the pad.
Be careful to align the holes in the abrasive disc with
those in the pad.
Toremovethediscfromthepad,justpullupfromits
edge.
6


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Makita BO6050 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Makita BO6050 in the language / languages: English, German, Dutch, Danish, French, Italian, Portuguese, Turkish, Spanish as an attachment in your email.

The manual is 13,12 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info