Manual Makita BO6050 (page 5 of 56) (English, German, Dutch, Danish, French, Italian, Portuguese, Turkish, Spanish)

691728

Zoom out

Zoom in

1/56

5ENGLISH

Save all warnings and instruc-

tions for future reference.

The term "power tool" in the warnings refers to your

mains-operated (corded) power tool or battery-operated

(cordless) power tool.

Sander safety warnings

1. Always use safety glasses or goggles.

Ordinary eye or sun glasses are NOT safety

glasses.

2. Hold the tool rmly.

3. Do not leave the tool running. Operate the tool

only when hand-held.

4. This tool has not been waterproofed, so do not

use water on the workpiece surface.

5. Ventilate your work area adequately when you

perform sanding operations.

6. Some material contains chemicals which may

be toxic. Take caution to prevent dust inhala-

tion and skin contact. Follow material supplier

safety data.

7. Use of this tool to sand some products, paints

and wood could expose user to dust contain-

ing hazardous substances. Use appropriate

respiratory protection.

8. Be sure that there are no cracks or breakage

on the pad before use. Cracks or breakage

may cause a personal injury.

SAVE THESE INSTRUCTIONS.

WARNING: DO NOT let comfort or familiarity

with product (gained from repeated use) replace

strict adherence to safety rules for the subject

product. MISUSE or failure to follow the safety

rules stated in this instruction manual may cause

serious personal injury.

FUNCTIONAL

DESCRIPTION

CAUTION: Always be sure that the tool is

switched off and unplugged before adjusting or

checking function on the tool.

Switch action

CAUTION: Before plugging in the tool, always

check to see that the slide switch actuates prop-

erly and returns to the "OFF" position when the

rear of the slide switch is depressed.

CAUTION: When locking tool in "ON" position

apply caution and maintain rm grasp on tool.

To start the tool, slide the slide switch toward the "I

(ON)" position. For continuous operation, press the

front of the slide switch to lock it.

►Fig.1: 1. Slide switch

To stop the tool, press the rear of the slide switch, then

slide it toward the "O (OFF)" position.

►Fig.2: 1. Slide switch

Speed adjusting dial

►Fig.3: 1.Speedadjustingdial

The rotating speed can be changed by turning the

speedadjustingdialtoagivennumbersettingfrom1to

5. Higher speed is obtained when the dial is turned in

the direction of number 5. And lower speed is obtained

when it is turned in the direction of number 1.

Refer to the table for the relationship between the num-

ber settings on the dial and the approximate rotating

speed.

Number Orbits per min. Pad rotating

speed per minute

in random orbit

with forced rota-

tion mode

1 1,600 140

2 2,900 260

3 4,200 370

4 5,500 490

5 6,800 600

NOTICE: If the tool is operated continuously at low

speeds for a long time, the motor will get overloaded,

resulting in tool malfunction.

NOTICE:Thespeedadjustingdialcanbeturned

only as far as 5 and back to 1. Do not force it past 5

or1,orthespeedadjustingfunctionmaynolonger

work.

Electronic function

The tools equipped with electronic function are easy to

operate because of the following features.

Constant speed control

Possibletogetnenish,becausetherotatingspeedis

kept constant even under the loaded condition.

Soft start feature

Soft start because of suppressed starting shock.

Selecting the action mode

Use the change knob to change the rotation mode.

NOTICE: Always turn the knob fully. If the knob is in

the middle position, you can not turn on the tool.

NOTE: You can not change the action mode when the

tool is switched on.

Random orbit with forced rotation

mode

►Fig.4: 1. Change knob

Random orbit with forced rotation mode is orbital action

with forced rotation of the pad for rough sanding and

polishing.

Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

Forumrules

To achieve meaningful questions, we apply the following rules:

First, read the manual;
Check if your question has been asked previously;
Try to ask your question as clearly as possible;
Did you already try to solve the problem? Please mention this;
Is your problem solved by a visitor then let him/her know in this forum;
To give a response to a question or answer, do not use this form but click on the button 'reply to this question';
Your question will be posted here and emailed to our subscribers. Therefore, avoid filling in personal details.

new questions and answers
new manuals

You will receive an email to register for one or both of the options.

Get your user manual by e-mail

Enter your email address to receive the manual of Makita BO6050 in the language / languages: English, German, Dutch, Danish, French, Italian, Portuguese, Turkish, Spanish as an attachment in your email.

The manual is 13,12 mb in size.

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.

Info

Makita BO6050 Manual

Product: