598440
21
Zoom out
Zoom in
Previous page
1/28
Next page
21
Daily maintenance
The following maintenance work must be carried out each time
after the brushcutter has been used.
Cleaning the air lter
If the workplace is very dusty or sandy, the
lter must be cleaned at regular intervals, due
to the fact that only a clean air lter will gua-
rantee full engine performance. Coarse parti-
cles of dirt can destroy the engine!
Renew damaged air lters immediately!
To clean the air lter, lay down the brushcutter so that it is resting
on its foot in stable position.
The tool you will require is the Phillips screwdriver.
1 Unscrew the screw (
1).
2 Grab the air lter cover (
2) at the bottom and pull it off.
3 Push the choke lever (
3) all the way up to the limit stop.
Particles of dust can no longer drop into the carburetor
now.
4 Remove both air lters (
4, 5) and wash them off in lukewarm
alkaline soap solution with commercial-grade dish-washing
detergent.
5 Let the air lters dry completely.
6 Reinsert both air lters (rst the white one (
5) with the clip
facing downward on the left-hand side).
7 Place the air lter cover on the upper clips (
6) rst, and
then press the lower part of the cover in the direction of
the engine (you must be able to hear the cover snap into
place).
8 Retighten the screw rmly.
Weekly maintenance
The following maintenance work must be carried out once a
week during regular use.
Checking/replacing the spark plug
The engine must have cooled down completely before you can
begin to the check or replace the spark plugs.
Lay down the brushcutter rst so that it is resting on its foot in
stable position.
The tools you will require is the combination wrench (plus the
screwdriver as a handle) as well as a pair of insulated pliers.
Materials: Use NGK-CMR 6A-type spark plugs only
(see extract from the spare parts list).
1 Turn out the screw (
1).
2 Remove the spark plug cap (
2).
3 Pull off the spark plug connector (
3) from the spark plug.
4 Use the combination wrench to turn the spark plug (
4) out
of the opening.
The spark plug must be replaced if its insulation
body is damaged or if its electrode is extremely
burned, soiled or oiled up, or if you can no lon-
ger see a spark during the spark test described
below.
The gap between the electrodes must be
0.7-0.8 mm (see illustration).
0,7–0,8 mm
4
2
1
3
5
6
4
2
1
3
21


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Makita BCX3410 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Makita BCX3410 in the language / languages: English as an attachment in your email.

The manual is 1,28 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of Makita BCX3410

Makita BCX3410 User Manual - German - 28 pages


The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info