598440
19
Zoom out
Zoom in
Previous page
1/28
Next page
19
Maintenance
The maintenance work described below must be performed
regularly and properly in order to guarantee long service life of
your brushcutter and to prevent any form of damage. Warranty
claims will only be recognized in that case.
For all work on the brushcutter:
Turn off the engine and pull off the spark plug
connector!
Wear protective gloves!
Observe the accident prevention regulations
issued by the trade association and insurance
company in charge!
Do not perform any structural modications
or maintenance work on the brushcutter
extending beyond the structural modications or
maintenance work described in this instruction
manual! Have a MAKITA service center perform
all other work for you; otherwise, you will be
putting your safety at risk!
Checking the oil level
When laying down the dipstick, make sure that
it does not come into contact with dirt under no
circumstances whatsoever! To be on the safe
side, always have a clean rag ready!
1 If necessary, let the engine cool down.
2 Clean the area around the dipstick (
1) thoroughly, so that
no dirt can get into the crankcase.
3 Lay down the brushcutter, so that it is resting on its foot in
stable position.
4 Turn the dipstick out of the opening anticlockwise.
5 Wipe off the dipstick with a clean rag.
6 Dip the dipstick through the opening into the crankcase and
pull it out again.
7 Read the oil level (see illustration).
8 If necessary, use a suitable lling bottle to rell engine oil
up to the bottom edge of the ller opening (2).
An engine oil bottle can be used for precise do-
sing without spilling engine oil (available as an
accessory, see extract from the spare parts list).
9 Turn the dipstick back in again.
Tools
Sharpening the 4-tooth star blade
Metal cutting tools are only allowed to be res-
harpened by specialized workshop since an
improperly resharpened can cause unbalance
and therefore constitutes considerable risk of
injury. Beyond that, damage to the machine can
be caused by vibrations!
Every MAKITA service center will sharpen and balance the
4-tooth star blade for you.
In order to extend its period of use, the 4-tooth
star blade can be turned once until both blade
sides are blunt.
180°
2
1
OK
refill
19


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Makita BCX3410 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Makita BCX3410 in the language / languages: English as an attachment in your email.

The manual is 1,28 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of Makita BCX3410

Makita BCX3410 User Manual - German - 28 pages


The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info