Manual Makita BBX7600 (page 12 of 128) (English, German, Dutch, French, Italian, Portuguese, Spanish)

598423

Zoom out

Zoom in

1/128

OPERATION

1. Starting

WARNING

• Never attempt engine start in a place where the fuel has been supplied. When starting the engine, keep a distance of at least 3 m.

− Otherwise, it will may cause ignition or fire.

• Exhaust gas from the engine has toxic consequences. Do not operate the engine in a poorly-ventilated place, such as in a tunnel, building, etc.

− Operating the engine in the poorly-ventilated place may cause poisoning by exhaust gas.

• In case of detection of any abnormality in sound, odor, vibration after start, stop the engine immediately and carry out inspection.

− If the engine is operated without attending such abnormality, an accident may occur.

• Confirm that the engine stops when the stop switch is set to “O” position.

1) When the engine is cold, or when the fuel it refueled

(1) Set this machine on a flat space.

(2) Set the stop switch to “ I “ position.

(3) Verify that the cruise control lever is in the low-speed position.

(4) Continue to push the primer pump until fuel enters into the primer

pump.

࡮In general, fuel enters into the carburetor by 7 to 10 pushes.

࡮If the primer pump is pushed excessively, an excess of gasoline

returns to the fuel tank.

(5) Lifting the choke lever of the air cleaner right side, close the choke

lever.

(6) Hold the element cover with a left hand to prevent the engine from

moving, settle down to take the stable position.

(7) Pull out slowly the starter handle till a certain resistance is felt. Return

the starter handle backward once from this position, then pull it out with

force.

࡮Never pull the rope to the full.

࡮Once the start knob is pulled, never release your hand immediately.

Hold the start knob until it returns to its original point.

(8) When the engine starts, open the choke lever.

࡮Open the choke lever progressively while checking the engine

operation. Be sure to open the choke lever to the full in the end.

࡮In cold or when the engine is cooled down, never open the choke lever

suddenly. Otherwise, the engine may stop.

(9) Continue warm-up operation for 2 to 3 minutes.

(10) Rotation of the engine speed stabilizes and when from low speed

making at high-speed rotation, if reaches the point where it accelerates

smoothly, it is completion of warming-up.

(2)

Primer pump

Choke lever

(3)

(4)

(8)

(9)

Stop Switch

Cruise control lever

Hi-speed

Low-speed

Open

Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

Forumrules

To achieve meaningful questions, we apply the following rules:

First, read the manual;
Check if your question has been asked previously;
Try to ask your question as clearly as possible;
Did you already try to solve the problem? Please mention this;
Is your problem solved by a visitor then let him/her know in this forum;
To give a response to a question or answer, do not use this form but click on the button 'reply to this question';
Your question will be posted here and emailed to our subscribers. Therefore, avoid filling in personal details.

new questions and answers
new manuals

You will receive an email to register for one or both of the options.

Get your user manual by e-mail

Enter your email address to receive the manual of Makita BBX7600 in the language / languages: English, German, Dutch, French, Italian, Portuguese, Spanish as an attachment in your email.

The manual is 3,76 mb in size.

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.

Info

Makita BBX7600 Manual

Product: