Manual Makita BBX7600 (page 10 of 128) (English, German, Dutch, French, Italian, Portuguese, Spanish)

598423

Zoom out

Zoom in

1/128

BEFORE STARTING THE ENGINE

1. Checking and Refilling Engine Oil

1) Follow the procedure below when the engine oil is cold i.e. the blower has not

been running.

䊶Inspection: Set the blower down on a level surface and remove the oil cap. Verify

that the oil level is within the upper and lower limit marks on the oil

level gauge. If the oil is not up to the 100mL level, fill up with new oil.

䊶Adding Oil: Set the blower down on a level surface and remove the oil cap. Fill the

oil up to the upper limit of the oil level gauge.

2) On average, engine oil normally needs to be added after every 20 hours of

operation. This interval for every change in oil corresponds to refueling the

blower approximately 10-15 times.

3) Please change the oil whenever it becomes dirty or significantly changes color.

(Refer to p. 15 for the oil change procedure and frequency.)

Recommended oil: Makita genuine oil or SAE10W-30 oil of API type SF grade or better (4 stroke motor oil for automobiles)

Oil capacity: Approximately 0.22 L (220 ml)

CAUTION

• If the blower is not stored in an upright position, the oil may flow from the level gauge into the engine and give a false reading when

checking the oil level. This may result in inadvertently overfilling whenever adding engine oil. Always store in an upright position.

• If the upper oil level limit is exceeded, this can result in the oil becoming dirty and white smoke from burning excess oil.

㩷

• Wipe off dirt and grime around the opening before removing the oil cap.

• Remove the oil cap and place it on a clean surface so that it does not accumulate any sand, dirt, or other foreign bodies. These may

stick to the cap and adulterate the engine oil if proper care is not taken. Dirty oil containing sand, dirt, or foreign bodies may cause

excessive wear on the engine due to improper lubrication and result in a breakdown.

Check Point #1: Concerning the oil cap when adding oil㩷

㩷㩷

㩷

• Oil spillage on the outside on the blower may result in the engine oil becoming dirty or adulterated. Therefore, please wipe off any oil

spillage before starting the engine.

Check Point #2: If oil is spilled when adding oil㩷

㩷㩷

㩷

Oil level gauge

Upper limit

Remain 100 mL

Lower limit

Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

Forumrules

To achieve meaningful questions, we apply the following rules:

First, read the manual;
Check if your question has been asked previously;
Try to ask your question as clearly as possible;
Did you already try to solve the problem? Please mention this;
Is your problem solved by a visitor then let him/her know in this forum;
To give a response to a question or answer, do not use this form but click on the button 'reply to this question';
Your question will be posted here and emailed to our subscribers. Therefore, avoid filling in personal details.

new questions and answers
new manuals

You will receive an email to register for one or both of the options.

Get your user manual by e-mail

Enter your email address to receive the manual of Makita BBX7600 in the language / languages: English, German, Dutch, French, Italian, Portuguese, Spanish as an attachment in your email.

The manual is 3,76 mb in size.

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.

Info

Makita BBX7600 Manual

Product: