657979

Makita AN935H Manual

13
Zoom out
Zoom in
Previous page
1/84
Next page
13 ENGLISH
Removing jammed nails
CAUTION: Always lock the trigger by turning
the trigger lock lever to the lock position , and
disconnect the hose before removing jammed
nails. Also remove the nails from the magazine
before cleaning a jam.
1. Depress the latch lever and open the door. Open
the magazine cap and remove the nail coil.
2. Insertasmallmetalrodintothenailejectionport
and hit it with a hammer lightly.
►Fig.29: 1. Metal rod 2.Nailejectionport3. Hammer
3. Removethejammednailwithaat-bladescrew-
driver or other similar tool.
►Fig.30
4. Reset the nail coil and close the magazine cap
and the door.
MAINTENANCE
CAUTION: Before attempting to perform
inspection or maintenance, always lock the trig-
ger by turning the trigger lock lever to the lock
position , and disconnect the air hose from the
tool.
NOTICE: Never use gasoline, benzine, thinner,
alcohol or the like. Discoloration, deformation or
cracks may result.
Cleaning of tool
Irondustthatadheretothemagnetcanbeblownoffby
using an air duster.
►Fig.31: 1. Magnet
Storage
Whennotinuse,disconnectthehose.Thencaptheair
ttingwiththecap.Storethenailerinawarmanddry
place.
►Fig.32: 1.Cap
Maintenance of compressor, air set
and air hose
Afteroperation,alwaysdrainthecompressortankand
theairlter.Ifmoistureisallowedtoenterthetool,
itmayresultinpoorperformanceandpossibletool
failure.
►Fig.33: 1. Drain cock
Keeptheairhoseawayfromheat(over60°C,over
140°F),awayfromchemicals(thinner,strongacidsor
alkalis).Also,routethehoseawayfromobstacleswhich
it may become dangerously caught on during operation.
Hosesmustalsobedirectedawayfromsharpedges
and areas which may lead to damage or abrasion to
the hose.
TomaintainproductSAFETYandRELIABILITY,
repairs,anyothermaintenanceoradjustmentshould
beperformedbyMakitaAuthorizedorFactoryService
Centers,alwaysusingMakitareplacementparts.
OPTIONAL
ACCESSORIES
CAUTION: These accessories or attachments
are recommended for use with your Makita tool
specied in this manual.Theuseofanyother
accessoriesorattachmentsmightpresentariskof
injurytopersons.Onlyuseaccessoryorattachment
foritsstatedpurpose.
Ifyouneedanyassistanceformoredetailsregard-
ingtheseaccessories,askyourlocalMakitaService
Center.
• Nails
• Airhose
• Safetygoggles
NOTE: Some items in the list may be included in the
toolpackageasstandardaccessories.Theymay
differfromcountrytocountry.
… 13 …


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Makita AN935H at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Makita AN935H in the language / languages: English, German, Dutch, Danish, French, Italian, Portuguese, Portuguese, Spanish as an attachment in your email.

The manual is 17,43 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info