Manual Makita 9921 (page 6 of 40) (English, German, Dutch, Danish, French, Italian, Portuguese, Swedish, Turkish, Spanish, Norwegian, Finnish)

691015

Zoom out

Zoom in

1/40

Switch action (Fig. 6)

CAUTION:

•

Before plugging in the tools, always check to see

that the switch trigger actuates properly and returns

to the ‘‘OFF’’ position when released.

•

The tools should not be in contact with the work-

piece surface when you turn the tools on or off.

Otherwise a poor sanding finish or damage of the

belt may result.

To start the tools, simply pull the trigger. Release the

trigger to stop. For continuous operation, pull the

trigger and then push in the lock button. To stop the

tools from the locked position, pull the trigger fully,

then release it.

Sanding operation

Hold the tools firmly with both hands. Turn the tools on

and wait until it attains full speed. Then gently place

the tools on the workpiece surface. Keep the belt flush

with the workpiece at all times and move the tools

back and forth. Never force the tools. The weight of

the tools applies adequate pressure. Excessive pres-

sure may cause stalling, overheating of the motor,

burning of the workpiece and possible kickback.

Connecting to Makita vacuum cleaner or dust collector

Cleaner sanding operations can be performed by connecting the belt sander to Makita vacuum cleaner or dust

collector.

When connecting to Makita vacuum cleaner (Model 406/431), an optional hose 28 mm in inner dia. or joint 25

is necessary. See the figure below.

When connecting to Makita dust collector (Model 420), the optional hose or joint is not necessary. You can

connect the belt sander directly to the hose of the dust collector.

Carbon plate (Fig. 7)

For greater sanding efficiency and to help the belt run cooler, install an optional carbon plate on the steel plate

when sanding hardwood or steel.

MAINTENANCE

CAUTION:

Always be sure that the tools is switched off and

unplugged before carrying out any work on the tools.

Replacement of carbon brushes (Fig.8&9)

Replace carbon brushes when they are worn down to

the limit mark. Both identical carbon brushes should

be replaced at the same time.

To maintain product safety and reliability, repairs,

maintenance or adjustment should be carried out by a

Makita Authorized Service Center.

Makita vacuum cleaner

Hose 28 mm in inner dia.

(When connecting to vacuum cleaner Model 406)

Joint 25

(When connecting to vacuum cleaner Model 431)

Hose for vacuum cleaner

9403/9921 (E) (’100. 10. 11)

Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

Forumrules

To achieve meaningful questions, we apply the following rules:

First, read the manual;
Check if your question has been asked previously;
Try to ask your question as clearly as possible;
Did you already try to solve the problem? Please mention this;
Is your problem solved by a visitor then let him/her know in this forum;
To give a response to a question or answer, do not use this form but click on the button 'reply to this question';
Your question will be posted here and emailed to our subscribers. Therefore, avoid filling in personal details.

new questions and answers
new manuals

You will receive an email to register for one or both of the options.

Get your user manual by e-mail

Enter your email address to receive the manual of Makita 9921 in the language / languages: English, German, Dutch, Danish, French, Italian, Portuguese, Swedish, Turkish, Spanish, Norwegian, Finnish as an attachment in your email.

The manual is 0,32 mb in size.

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.

Info

Makita 9921 Manual

Product: