Manual Makita 6802 (page 4 of 12) (English, German, Dutch, Danish, French, Italian, Portuguese, Swedish, Spanish, Norwegian, Finnish)

78953

Zoom out

Zoom in

1/12

NOTE:

Even with the switch on and motor running, the bit

will not rotate until you fit the point of the bit in the

screw head and apply forward pressure to engage

the clutch.

Reversing switch action (Fig. 6)

CAUTION:

• Always check the direction of rotation before opera-

tion.

• Use the reversing switch only after the tool comes

to a complete stop. Changing the direction of rota-

tion before the tool stops may damage the tool.

This tool has a reversing switch to change the direc-

tion of rotation. Move the reversing switch lever to the

position for clockwise rotation or the

position

for counterclockwise rotation.

Operation

Fit the screw on the point of the bit and place the

point of the screw on the surface of the workpiece to

be fastened. Apply pressure to the tool. Start the tool

slowly and then increase the speed gradually. With-

draw the tool as soon as the clutch cuts in.

CAUTION:

• Use the proper bit for the head of the screw that you

wish to use.

• When fitting the screw onto the point of the bit, be

careful not to push in on the screw. If the screw is

pushed in, the clutch will engage and the screw will

rotate suddenly. This could damage a workpiece or

cause an injury.

• Do not continue unnecessary clutching operation.

NOTE:

Make sure that the bit is inserted straight in the screw

head, or the screw and/or bit may be damaged.

When using insert bit (Fig. 7 & 8)

Fit together the insert bit and magnetic bit holder.

Install a locator assembly for an insert bit.

Then adjust depth setting. Initially, adjust the locator

assembly to create a distance of approximately 1 mm

from the tip of the locator to the base of the screw

head. Continue adjusting until the proper depth set-

ting is obtained by following the method of “Depth

adjustment”.

To remove the bit, pull the magnetic bit holder firmly.

Hold the magnetic bit holder in your hand and grasp

the bit with a pair of pliers. Pull the bit out of the mag-

netic bit holder. Sometimes, it helps to wiggle the bit

with the pliers as you pull.

MAINTENANCE

CAUTION:

Always be sure that the tool is switched off and

unplugged before carrying out any work on the tool.

To maintain product safety and reliability, repairs,

maintenance or adjustment should be carried out by

a Makita Authorized Service Center.

Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

Forumrules

To achieve meaningful questions, we apply the following rules:

First, read the manual;
Check if your question has been asked previously;
Try to ask your question as clearly as possible;
Did you already try to solve the problem? Please mention this;
Is your problem solved by a visitor then let him/her know in this forum;
To give a response to a question or answer, do not use this form but click on the button 'reply to this question';
Your question will be posted here and emailed to our subscribers. Therefore, avoid filling in personal details.

new questions and answers
new manuals

You will receive an email to register for one or both of the options.

Get your user manual by e-mail

Enter your email address to receive the manual of Makita 6802 in the language / languages: English, German, Dutch, Danish, French, Italian, Portuguese, Swedish, Spanish, Norwegian, Finnish as an attachment in your email.

The manual is 0,15 mb in size.

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.

Info

Makita 6802 Manual

Product: