690940
7
Zoom out
Zoom in
Previous page
1/72
Next page
7
ENGLISH (Original instructions)
Explanation of general view
SPECIFICATIONS
Due to our continuing program of research and development, the specifications herein are subject to change without
notice.
Specifications may differ from country to country.
Weight according to EPTA-Procedure 01/2003
Symbols
END310-1
The following show the symbols used for the equipment.
Be sure that you understand their meaning before use.
...... Read instruction manual.
...... Wear safety glasses.
................. Do not place hand or fingers close to
the blade.
.................. Only for EU countries
Do not dispose of electric equipment
together with household waste
material!
In observance of the European
Directive, on Waste Electric and
Electronic Equipment and its
implementation in accordance with
national law, electric equipment that
have reached the end of their life must
be collected separately and returned to
an environmentally compatible
recycling facility.
Intended use
ENE003-1
The tool is intended for cutting in wood.
Power supply
ENF001-1
The tool should be connected only to a power supply of
the same voltage as indicated on the nameplate, and can
only be operated on single-phase AC supply. This tool
should be grounded while in use to protect the operator
from electric shock. Use only three-wire extension cords
which have three-prong grounding-type plugs and three-
pole receptacles which accept the tool’s plug.
General Power Tool Safety
Warnings
GEA010-1
WARNING Read all safety warnings and all
instructions. Failure to follow the warnings and
instructions may result in electric shock, fire and/or
serious injury.
1. Board
2. Riving knife
3. Leg
4. Switch hole
5. Sign A
6. Leg support (long)
7. Leg support (short)
8. Foot
9. Wider side
10. Tire complete
11. Dust nozzle
12. Carrying handle
13. Screw
14. Switch
15. Tapping screw
16. Guide rail
17. Square neck bolt
18. Sub table
19. Stay (long)
20. Stay (short)
21. Hook
22. Push stick
23. Handle
24. Lock knob
25. Arrow pointer
26. Hex wrench
27. Wrench
28. Loosen
29. Inner flange
30. Saw blade
31. Outer flange
32. Washer
33. Hex bolt
34. Tighten
35. Blade guard
36. Hex nut
37. Clearance between the riving knife
and blade teeth
38. Knob
39. Face/edge parallel
40. Auxiliary fence
41. Workpiece
42. Push block
43. Rip fence
Model 2712
Arbor hole 30 mm
Blade diameter 315 mm
Blade body thickness 2 mm or less
Max. cutting capacities
Thickness at 90° 85 mm
Thickness at 45° 58 mm
Width 1,600 mm
No load speed 2,950 (min
-1
) (50 Hz) 3,400 (min
-1
) (60 Hz)
Table size (L x W) 550 mm x 1,600 mm with sub table (back)
Net weight 52.9 kg
Safety class Class I
7


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Makita 2712 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Makita 2712 in the language / languages: English, German, Dutch, Danish, French, Italian, Portuguese, Turkish, Spanish as an attachment in your email.

The manual is 3,11 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info