Manual MakerBot Replicator 2 - MB1036 (page 15 of 60) (English)

534674

Zoom out

Zoom in

1/60

INSTALLING FILAMENT GUIDE TUBE AND SPOOL HOLDER

B SETTING UP YOUR MAKERBOT REPLICATOR 2 DESKTOP 3D PRINTER

6a. Locate the ﬁlament guide tube. Insert one

end into the hole at the top of the extruder

and push the tube in as far as it will go.

6b. Insert the other end of the ﬁlament guide

tube into the le guide tube holder [when

viewed from the back] on the back of the

MakerBot Replicator 2. Make sure that the

end of the ﬁlament guide tube is ﬂush with

the bottom of the guide tube holder. The

ﬁlament guide tube should not hang down

past the bottom of the guide tube holder.

7a. Locate the spool holder. Tilt the spool

holder and insert the square end into

the le side opening on the back of the

MakerBot Replicator 2 [when viewed from

the back].

Installing the Filament Guide Tube

Installing the Spool Holder

MB2020_REP2_UserManual_V4.indd 15 7/22/13 5:32 PM

Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

Forumrules

To achieve meaningful questions, we apply the following rules:

First, read the manual;
Check if your question has been asked previously;
Try to ask your question as clearly as possible;
Did you already try to solve the problem? Please mention this;
Is your problem solved by a visitor then let him/her know in this forum;
To give a response to a question or answer, do not use this form but click on the button 'reply to this question';
Your question will be posted here and emailed to our subscribers. Therefore, avoid filling in personal details.

new questions and answers
new manuals

You will receive an email to register for one or both of the options.

Get your user manual by e-mail

Enter your email address to receive the manual of MakerBot Replicator 2 - MB1036 in the language / languages: English as an attachment in your email.

The manual is 3,42 mb in size.

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of MakerBot Replicator 2 - MB1036

MakerBot Replicator 2 - MB1036 User Manual - German - 45 pages

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.

Info

MakerBot Replicator 2 - MB1036 Manual

Product: