494145

Magnavox MBP5320 Manual

40
Zoom out
Zoom in
Previous page
1/63
Next page
EN - 40
10. Press [RED] to go to the “Proxy Port” setting screen.
11. Enter the proxy port number using the NUMBER buttons, then select “OK”, then press [OK].
12. Connection test confirmation screen will appear. Select “Yes”, then press [OK] to start the connection test. The test
result will appear right after the connection test finishes.
13. “Network connection succeeds.” will be displayed. Select “End” then press [OK] to complete the settings.
D Note for “IP Address”, “Subnet Mask”, “Default Gateway”, “Primary DNS” and “Secondary DNS”
• The range of input numbers is between 0 and 255.
• If you enter a number larger than 255, the number will automatically be reset to 255.
• When you enter a wrong number, select “Clear” to clear the incorrect number. (The number will be set to “0”)
• If you want to enter a 1 or 2-digit number in one cell, press [] to move on to the next cell.
D Note for “Proxy Address” and “Proxy Port”
• The range of input numbers for the port number is between 0 and 65535. (If you enter a number larger than 65535, it
will be regarded as 65535.)
• For proxy port, certain ports might be closed, blocked or unusable depending on your network environment.
• When the settings are changed, the network connection may be disabled depending on the device.
Wireless Connection
If you connect this unit to a wireless network, select “Wireless” and set up necessary settings.
Please make a note of your SSID (Service Set Identifier ― wireless network name) and its WEP* / WPA / WPA2 key before
proceeding with the setup.
* “Easy Connect (WPS)” cannot be used when the Security protocol is set to “WEP”.
Easy Connect (WPS)
Push Button Method
You can set up a Wireless connection quickly.
(“Push Button Method” is only available when your router supports it. For details, please refer to the user manual of
your wireless router.)
Please confirm your wireless router has a PBC* (Push Button Configuration) button.
1. Use [] to select “Network Setup” in the Home Menu, then press [OK].
2. Use [] to select “Wireless”, then press [OK].
3. Use [] to select “Easy Connect (WPS)”, then press [OK].
4. Use [] to select “Push Button Method”, then press [OK].
Then within 2 minutes push the PBC* (Push Button Configuration) button on your wireless router.
* PBC button may be called WPS (Wi-Fi Protection System) button on your wireless router.
• The unit will automatically start the Connection test. The test result will appear right after the test finishes.
5. “Network connection succeeds.” will be displayed. Select “End” then press [OK] to complete the settings.
Please input the Proxy Port.
Return Clear OK
65525
Proxy Port
Access Point Setting
Push Button Method
Please push the PBC (push button configuration) on the wireless router
and select ‘Push Button Method’ button on screen.
PIN Code Method
Please input the PIN number into the wireless router and select
‘PIN Code Method’ button on screen.
PIN Code is: xxxxxxxx
Return
Cancel
2 / 7
continued on next page
… 40 …


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Magnavox MBP5320 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Magnavox MBP5320 in the language / languages: English, Spanish as an attachment in your email.

The manual is 26,1 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info