494145

Magnavox MBP5320 Manual

39
Zoom out
Zoom in
Previous page
1/63
Next page
EN - 39
EN
Manual (Wired)
In the following cases, select “Manual” to set each setting as necessary.
- When connection test failed with the setting of “Auto”.
- When instructed by your Internet service provider to make specific settings in accordance with your network environment.
1. Follow steps 1 and 2 in “Auto (Wired)” on page 38.
2. Use [] to select “Manual”, then press [OK].
3. Use [] to select “IP Address”, then press [OK].
4. “IP Address” setting screen will appear. Enter an IP address using the cursor buttons and the NUMBER buttons.
• Enter an IP address after checking the specifications of your router.
• If an IP address is unknown, check the IP address of other devices (e.g. PC connected with a LAN cable). Then, in the
furthest cell to the right, assign a different number from those other devices.
5. Use [] to select “OK”, then press [OK].
6. Configure “Subnet Mask”, “Default Gateway”, “Primary DNS” and “Secondary DNS” in the same manner.
• Enter the DNS addresses provided by your Internet service provider.
• If the DNS address is unknown, check the DNS address of other devices (e.g. PC connected via LAN cable) and
assign the same DNS address.
7. Use [] to select “Next”, then press [OK].
8. Use [] to select “Yes” or “No” for proxy server, then press [OK].
• If you use a proxy server, select “Yes” then press [OK] to go to the next step.
• If you do not use a proxy server, select “No” then press [OK] to go to step 12.
9. “Proxy Address” setting screen will appear. Enter a proxy address using the cursor buttons, the NUMBER buttons and
the color keys.
Please input the IP Address.
Return Clear OK
0 . 0 . 0 . 0
IP Address
Network Settings
Please enter your network settings.
IP Address
Subnet Mask
Default Gateway
Primary DNS
Secondary DNS
:
:
:
:
:
0
255
0
0
0
0
255
0
0
0
0
255
0
0
0
0
0
0
0
0
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
Next
Return
Cancel
5 / 7
Please input the Proxy Address with software keyboard.
http://xxxxx.xxx
Done Return Clear a/A/@
Access Point Setting
5 / 7
[]:
Used to move through the menu.
[the NUMBER buttons]:
Enter number (remote control).
[OK]:
Enter the selected setting.
[RED]*:
Confirm and set the network setting.
[GREEN]: Exit / Cancel network setting.
[BLUE]*:
Clear the enter number or letters.
[YELLOW]:
Switch between different characters
abc (lower case), ABC (uppercase),
and @!? (special characters).
* These buttons can be used in other network settings.
continued on next page
… 39 …


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Magnavox MBP5320 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Magnavox MBP5320 in the language / languages: English, Spanish as an attachment in your email.

The manual is 26,1 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info