616524
87
Zoom out
Zoom in
Previous page
1/156
Next page
Plug-ins 87
Tube Stage Parameter
IN / OUT: Here you can set the input and output level.
stages: In signal section 1 the signal only passes through the tube stages. In setting 2,
two stages are cascaded. This divides up the gain so that both stages are driven less
'hotly'. This increases the signal complexity and any tube artifacts.
class A / AB Optionally, a simple gain stage with asymmetric reference line (Class A)
or symmetric AB mode. In the A-mode odd and even harmonics emerge, the sound
image is similar to a 'warm' tube guitar amp. In the AB section only uneven harmonics
are created. The sound image is somewhat 'colder', but more transparent with
complex materials and can also be driven louder.
oversampling: If this switch is active, the virtual tube stages are controlled with one-
to four-times the project sampling rate, i.e with an internal sampling rate of 176 - 192
kHz.
pre-eq: This knob (called "Tilt" or "Level" on some devices) controls the effect of
a soft, passive 6 dB filter for prefiltering signals before the (first) tube stage. If
turned to the left the bass is emphasized and the highs are dampened. To the
right the inverted filtering happens. With this filter the signal can be
correspondingly processed before "Warming up" by selecting the prominent of
desired section. Compared to a standard EQ the effect of this filter is more subtle,
but it does possess a high 'musicality', by the internal circuitry and also because
of the slightly different phase response.
gain: This set the entire amplification factor. If two two tube stages are selected
using 'stages', the available Gain is divided by two and is distributed equally over
both stages.
post-eq: Operation and function is like pre-eq, however, this filter is placed
behind the (second) stage tube.
Tweak
Tube Bias: With this parameter you can control "Bias", or electric current voltage
inside a tube.
Energizer (plug-in)
The Energizer belongs to the so-called psycho-acoustic processors genre. These
devices are used in the studio, acoustic irradiation, and restoration areas in order to
enhance the sound.
87


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Magix Audio cleaning lab 2014 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Magix Audio cleaning lab 2014 in the language / languages: English as an attachment in your email.

The manual is 12,9 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info