616524

Magix Audio cleaning lab 2014 Manual

61
Zoom out
Zoom in
Previous page
1/156
Next page
Cleaning 61
Wizard: This opens a wizard that helps to create the noise sample. The wizard mainly
consists of a search function which helps you find the suitable noise sample in the
audio material. Various types of noise can be selected.
Save: The noise sample created can be saved in the noise sample folder. It is then
available as a new noise sample in the noise sample preset list for any other project.
Audio type: Set the type of edited audio material here, and the algorithm will be
adjusted accordingly.
Removed noise: The part of music that was filtered out by the DeNoiser can be
previewed for testing purposes.
Processing
Anti-noise: In this mode the DeNoiser works in an optimized mode to remove noise.
Anti-hum: In this mode the DeNoiser works in an optimized mode to remove tonal
interference. This includes feedback from power cables, power humming, PC fans,
video cameras, or ventilation noises.
If the "Max. damp tonal noise" option is active, all sounds of this kind will be removed.
The "Reduction" controller now affects all possible existing noise components
simultaneously. This makes sense because tonal disturbances are much more
annoying than other noise - a small amount of "extra" noise in the recording may be
allowed in order to avoid a greater loss of highs in the wanted signal.
Noise level: The threshold of the noise reduction function should be set as precisely
as possible. Values that are too low will result in insufficient noise dampening which
causes artefacts like interference or "twittering" (see below). High settings produce
dull results – useful signals that sound similar to hissing noises are also filtered away.
Take your time to find the best setting for the individual case.
Reduction: This sets the balance between the original signal and the signal with the
applied noise reduction. It's often better to reduce interference signals in small
imcrements, e. g. 3 to 6 dB, rather than as much as is possible to keep the sound
"natural". For buzzing, it’s best to apply complete removal.
DeRumble: Here you can activate a special filter for deep-frequency rumbling noises.
Examples of these noises are mechanical noises from old record players, wind, and
subsonic noises in microphone recordings.
Preset: All the DeNoiser settings, i. e. the noise sample applied and the settings of the
processing section can be saved as a preset for later use.
Artefacts
With incorrect settings, the DeNoiser and the DeHisser may leave behind a metallic
chirping or twittering sound, the so-called artefact noise. The cause of this is the
incomplete removal of the distortion. The ear is quite sensitive to this sound because
… 61 …


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Magix Audio cleaning lab 2014 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Magix Audio cleaning lab 2014 in the language / languages: English as an attachment in your email.

The manual is 12,9 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info