494089

Macrom 44.05 Manual

7
Zoom out
Zoom in
Previous page
1/44
Next page
MACROM INGLESE 44.05/07 14 OTTOBRE 1992 9
9
FEATURES
1 RCA-input connector, channel B/F (right)
2 RCA-input connector, channel A/E (left)
3 Input level adjustment of channels A-B
4 RCA- input connector, channel D, or BY-PASS output connector (right)
5 RCA- input connector, channel C, or BY-PASS output connector (left)
6 Input level adjustment of channels C-D
7 Output mode selector
8 Input mode selector
9 High Pass on/off selector
10 Low Pass on/off selector
11 Frequency adjustment of Low Pass (the indication is referred to -3 dB)
12 Frequency adjustment of High Pass (the indication is referred to -3 dB)
CONNECTIONS (Fig. 1, page 3)
•
•
•
•
•
MOS-FET POWER SUPPLY STAGE
The high power of the 44.05/44.07 is obtained by the use of a highly sophisticated C-MOS-FET
supply units giving constant performance, high efficiency in favour of lower current-consumption.
The results are excellent performance, a linear and ample frequency response with high
dynamics.
CAPACITIVE / INDUCTIVE POWER SUPPLY FILTER
This filter reduces radio frequency interferences (RFI) and cuts off system noises (i.e. the whine
of the alternator).
GILDED VETRONITE PRINTED CIRCUIT
GOLD-PLATED RCA-CONNECTORS
GOLD-PLATED SCREW-TYPE SPEAKER OUTPUT CONNECTIONS
INSTALLATION (Fig. 3, page 4)
Due to the high power of the amplifier a great amount of heat is generated when the unit is in use.
Therefore, it is necessary to install the unit in a place with good air circulation or otherwise the
amplifier will enter the protection mode. The most suitable place for installation is the boot;
obviously, the unit should not be covered with carpet floor or similar.
1. Place the unit at the point of installation and mark the position of the four securing screws
provided.
2. Drill the screw holes.
3. Place the amplifier in the correct position and secure it by means of the four tapping screws
provided.
NOTE: Connect the ground lead to a screw already provided on the chassis of the car (marked with
an * in the figure).
INSTALLATION
CONNECTIONS
… 7 …


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Macrom 44.05 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Macrom 44.05 in the language / languages: English, German, French, Italian, Spanish as an attachment in your email.

The manual is 0,75 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info