494088
6
Zoom out
Zoom in
Previous page
1/35
Next page
7
FEATURES
GILDED VETRONITE PRINTED CIRCUIT
GOLD-PLATED RCA INPUT CONNECTIONS
PROFESSIONAL GOLD-PLATED SCREW-TYPE SUPPLY TERMINALS
GOLD-PLATED SCREW-TYPE SPEAKER OUTPUT CONNECTIONS
SPEAKER IMPEDANCE
4 or 2 Ohm for stereo operation, 4 Ohm if mono-bridged
INSTALLATION
INSTALLATION (Fig. 3, page 4)
Due to the high output power of the amplifier a great amount of heat is generated when the unit is
in use. Therefore, it is necessary to install the unit in a position with good air circulation or otherwise
the amp will enter the protection mode. The best place where to install the amplifier is the boot; avoid
to cover the amp with carpet floor or other.
1. Place the amplifier at the point of installation chosen and mark the position of the four securing
screws provided.
2. Drill the screw holes.
3. Place the amp in the correct position and screw the four tapping screws on.
Note: Connect the ground lead to a screw already fixed to the metallic chassis of the car (identified
by *) in order to ensure a good ground contact.
CONNECTIONS AND ADJUSTMENTS
CONNECTIONS AND ADJUSTMENTS (Fig. 1, page 3)
1 RCA-type input connector, right channel (RIGHT)
2 RCA-type input connector, left channel (LEFT)
3 Input level adjustment
4 Gain selector switch Off/+3/+6dB Low-Boost
5 Input mode selector switch
6 Positive output terminal speaker A, or positive output terminal speaker C
7 Negative output terminal speaker A
8 Positive output terminal speaker B
9 Negative output terminal speaker B, or negative output terminal speaker C
10 30 / 20x2 / 25x2 Ampere fuses
11 Supply terminal +12 V to the battery (BATT)
12 Ground lead connection terminal (GND)
13 Remote switch-on terminal
14 Check control state indicator (Fig. 2, page 3)
6


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Macrom 43.10 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Macrom 43.10 in the language / languages: English, German, French, Italian, Spanish as an attachment in your email.

The manual is 0,3 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info