494088

Macrom 43.10 Manual

8
Zoom out
Zoom in
Previous page
1/35
Next page
L(Mono) ST L+R
2V 0.1V
0.5V
2V 0.1V
0.5V
OFF +3 +6dB
OFF +3 +6dB
OFF +3 +6dB
9
ADJUSTMENTS AND SWITCHES
INPUT SELECTOR SWITCH
a) STEREO MODE. Select the “ST” position when the amplifier is used
as a 2-channel stereo system.
Note: Also in this case connection of the mid channel is possible (C+ C-).
b) MODE “L - MONO”. Select the “L Mono” position when the amplifier
is used with only one input channel.
Note: Connect the leads coming from a single speaker to the terminals
(C+ C-) in order to obtain a BTL-connection (bridged).
In case stereo output is requested, connect a second amplifier in the
same way to the other speaker.
c) L + R MODE. Select the “L+R” position of the switch when the amplifier
is used for a subwoofer system using the right and left channel. Thus,
the two inputs are blended into one mono output signal portioned out
to the two channels or to one channel with twice the power, if the
subwoofer is connected to the mid channel (C+ C-)
LOW-BOOST SELECTOR SWITCH
a) “OFF”-MODE: In the “Off”-position the
amplifier has a linear response with no boosting
of the low frequencies.
b) “+3dB”-Mode: Select the “+3dB”-position to
slightly boost the low frequencies.
c) “+6dB”-Mode: Select the “+6dB”-position to
boost the low frequencies even more.
INPUT GAIN ADJUSTMENT CONTROL
The mid position (click) is used for the selection of an input sensitivity of 500
mV corresponding to the preamplified outputs of MACROM products.
In case the amplifier is to be connected to a head unit that is not of
MACROM make but is fitted with preamplified RCA outputs, proceed as
follows:
a) Set the volume control of your head unit to 3/4 of maximum output level.
b) Set the input gain control by means of a screwdriver from 2 V to 0.1 V
to the point where the maximum sound level with no distortion is
obtained.
L(Mono) ST L+R
L(Mono) ST L+R
… 8 …


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Macrom 43.10 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Macrom 43.10 in the language / languages: English, German, French, Italian, Spanish as an attachment in your email.

The manual is 0,3 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info