782323
35
Zoom out
Zoom in
Previous page
1/42
Next page
35
In more detail...
Inner flange
Outer flange
6. Use the Allen key to loosen the screw counter-clockwise. Remove the outer
flange and the saw blade. (Refer to Fig .26 & Fig. 27)
7. Clean both flanges and replace the saw blade.
8. Replace the outer flange in such way that the slaving pins sit in the recesses
of the inner flange.
9. Press and hold the shaft lock and tighten the screw. Press the plunge lock
button (1) for the casing to swivel up again.
Saw blade Output spindle
Screw Fig. 27
Brush replacement
The saw is equipped with self-isolating special brushes. They are automatically
isolated when worn, and the tool stops.
Check the carbon brushes regularly. Replace the carbon brushes with genuine
spare parts if either brush is worn to less than 6mm long.
MSPS1200 by MACAllister Cleaning and maintenance
NOTE : The rotation direction arrows of saw blade and saw must be
aligned!
NOTE : The carbon brushes must be replaced by a pair of similar
carbon brush available through the after-sales service organization or
qualified professional person.
35


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Mac Allister MSPS1200 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Mac Allister MSPS1200 in the language / languages: English as an attachment in your email.

The manual is 3.56 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info