782323
31
Zoom out
Zoom in
Previous page
1/42
Next page
31
MSPS1200 by MACAllister Product functions
6. Hold the saw firmly with both hands, press the plunge lock button (1) and the
ON/OFF switch (2).
7. Allow the blade to reach full speed, then pivot the saw forward to plunge the
blade into the workpiece to the set depth.
During first use the rubber lip is sawn off and thus splitter protection is
guaranteed up to the saw blade.
8. Push the saw forward along the track to engage the blade with the workpiece
and start the cut.
9. Maintain a consistent feed rate - too fast may put excessive strain on the motor.
Avoid any sudden movements of the saw.
10. Make your cut, again using the cutting width indicators as a guide to when to
raise the saw from the workpiece.
11. After completing the cut, release the ON/OFF switch and allow the blade to
come to a complete stop before removing the saw from the track.
1
2
Fig.23
With the track(0-48
)
IMPORTANT: When making bevel cuts it is essential to lock the saw in the track.
For a bevel cut, lock the saw to the track by rotating the track lock (9) to the ‘I’
position and set the anti-kickback knob (8) to the ‘I’ position.
In more detail...
31


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Mac Allister MSPS1200 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Mac Allister MSPS1200 in the language / languages: English as an attachment in your email.

The manual is 3.56 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info