Manual M-System MOK-620WT (page 26 of 27) (English, German, Dutch, French)

522894

Zoom out

Zoom in

1/27

After connecting the device to the power supply network (in accordance with

the requirements defined above) it is necessary to check the lighting of the hood and

whether its motor works correctly.

The wall socket shall be accessible for disconnecting the plug after the hood

is installed.

3. Setting the operation mode of the kitchen extractor hood

3.1 Setting the air extractor mode of operation of the hood

In the extractor mode air is discharged to the outside by a special conduit. In

that setting any carbon filters shall be removed. The hood should be connected to the

opening discharging air to the outside by means of a rigid or flexible conduit of 120

mm diameter, which should be purchased in a shop selling installation materials.

A qualified installer should be commissioned to make the connection.

3.2 Setting the odour absorber mode of operation of the hood

In this option filtered air returns to the room through openings in the front of

the hood. In this setting it is necessary to install the carbon filter (Fig. 6).

VI. Operation and maintenance

1. Operational safety.

All safety instructions included in chapter IV must be observed. Textile grease

filters and carbon filters should be replaced and aluminium filter should be cleaned

according to manufacturer’s instructions, or more frequently in periods of intensive

use (more than 4 hours a day). If a gas cooker is used it is forbidden to leave

uncovered flame. When removing pots from gas burners set the flame to its minimum

level. Always make sure that flame does not extend outside the pot. Such a situation

causes undesired energy losses and dangerous heat build-ups. The hood should not be

used for other purposes than those for which it was designed.

2. Operation. Control panel.

Operation of the hood can be

controlled by means of switches „W”

and „O” (Fig. 4):

- switch „O” controls lighting. Shifting

the switch to the left turns the lighting

on, to the right - turns the lighting off.

- switch „W” is used to control the hood motor. Successive shifts to the left turn on

three fan operation speeds. These control options enable the user to set the optimum

fan speed for his requirements at minimum noise.

- 0 – switch off the hood, 1 – first, minimum speed, 2 – second, medium speed, 3 –

third, maximum speed,

- L – switch on/off the lights.

Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

Forumrules

To achieve meaningful questions, we apply the following rules:

First, read the manual;
Check if your question has been asked previously;
Try to ask your question as clearly as possible;
Did you already try to solve the problem? Please mention this;
Is your problem solved by a visitor then let him/her know in this forum;
To give a response to a question or answer, do not use this form but click on the button 'reply to this question';
Your question will be posted here and emailed to our subscribers. Therefore, avoid filling in personal details.

new questions and answers
new manuals

You will receive an email to register for one or both of the options.

Get your user manual by e-mail

Enter your email address to receive the manual of M-System MOK-620WT in the language / languages: English, German, Dutch, French as an attachment in your email.

The manual is 0,44 mb in size.

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.

Info

M-System MOK-620WT Manual

Product: