522894
25
Zoom out
Zoom in
Previous page
1/27
Next page
25
3. Do not leave open flame under the hood. When removing pots from the burners set
the flame to its minimum level.
4. Any food cooked in fat shall be constantly monitored, since
overheated fat can ignite very easily.
5. The textile grease filter should be replaced, and the aluminium
filter should be cleaned at least every 2 months in connection
with the existing fire danger (saturated fat is very flammable).
6. Pull the plug of the power cord from a wall socket before any
filter cleaning or repair operation.
7. If any other non-electric devices are used in the same room as
the hood (e.g. liquid fuel ovens, flow-through or volumetric water
heaters), it is necessary to provide appropriate ventilation (air
supply). Safe operation is possible when during simultaneous
operation of the hood and combustion devices dependent on air
supply the negative pressure of not more than 0.004 milibar is
maintained at the location of these devices inside the room (this
point does not apply when the hood is used as an odour
absorber).
8. When connecting to 230V power supply network use an electric socket in working
order.
V. Installation
To install the hood perform the following operations:
1. mount the hood body A,
2. connect the hood to power supply network.
2. Installation of the hood body
a) trace a vertical line on the wall to indicate the center of the cooker plate, dismantle
the grease filter, hold the hood body „A” to the wall with its indicated center point on
the vertical line, with the
distance between the holes and
the cooker plate at least 710 mm
(Fig. 2). Note: make sure that the
hood body „A” is level.
b) mark the locations of
fixing holes on the wall
c) drill the holes as marked on the wall, using drills of diameter corresponding
to the attached expansion plugs, drive the plugs in and then screw the hood body „A”
to the wall (Fig. 3).
3. Connecting to the power network and operation check
25


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for M-System MOK-620WT at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of M-System MOK-620WT in the language / languages: English, German, Dutch, French as an attachment in your email.

The manual is 0,44 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info