26
Setting
1. Set the cooking function by turning the oven selector
to the function required.
2. The cooking temperature appears on the display. To
change it proceed as described in the Setting the cook-
ing chapter.
3. Press pushbutton 2. AUTO starts to flash and 0.00
appears.
4. Press pushbuttons 5 or 6 to set the cooking time (cook-
ing time in hours and minutes: set it to ten minutes less
than the time required because the stored heat will
complete the cooking).
5. On the display AUTO becomes steady and the cooking
programme starts.
6. Press pushbutton 3 (AUTO starts to flash).
7. Press pushbuttons 5 or 6 to set the time when the cook-
ing should finish.
The values set must be correct; e.g. if it is 08:00 a
cooking time of 3 hours, ending at 10:00, cannot be
set. In this case the programmer automatically sets the
end of cooking time for 11:00.
8. On the display AUTO becomes steady and the time
appears again. The cooking symbol goes out.
Starting cooking
9. The pan symbol lights up. The oven switches on and
the cooking cycle set starts.
AUTOMATIC COOKING
Start cooking at the programmed time and switch the oven off automatically after
the programmed cooking time.
