680029

M-System MIO670 Manual

38
Zoom out
Zoom in
Previous page
1/40
Next page
34
GENERAL
– The connection to the electrical network must be carried out by qualified personnel and
must be according to existing norms.
– The appliance must be connected to the electrical network verifying above all that the volt-
age corresponds to the value indicated on the specifications plate and that the cables sec-
tion of the electrical plant can bear the load which is also indicated on the plate.
– If the oven is supplied without a plug and is not connected directly to the mains, a
standard plug, suitable for the load, must be fitted.
– The colours of the wires in the appliance power cable may not correspond with the
colours marked on the terminals of your electrical plug. The plug should always be
wired as follows:
● connect the green/yellow wire to the terminal marked with the letter E or the earth
symbol or coloured green/yellow;
● connect the blue wire to the terminal marked with the letter N or coloured black;
● connect the brown wire to the terminal marked with the letter L or coloured red.
The connection of the appliance to the grounding unit is mandatory.
The manufacturer declines every responsability for any inconvenience resulting
from the inobservance of this condition.
Before effecting any intervention on the electrical parts the appliance must be
disconnected from the network.
– The bi-polar plug must be connected to an outlet connected to the grounding unit in con-
formity to security norms.
– If the oven is to be connected directly to the mains, it must be placed with an omnipolar
switch with minimum opening between the contacts of 3 mm between the appliance and
the mains.
– The power supply cable must not touch the hot parts and must be positioned so that it
does not exceed 75°C at any point.
– Once the oven has been installed, the switch or socket must always be accessible.
– If the power supply cable is damaged it must be substituted by a suitable cable available
in the after sales service.
– When using the appliance do not touch the heating elements inside the oven cavity.
Electrical section
6
… 38


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for M-System MIO670 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of M-System MIO670 in the language / languages: English as an attachment in your email.

The manual is 1,3 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info