Manual M-System MI-90 (page 55 of 60) (English, German, Dutch, French)

522558

Zoom out

Zoom in

1/60

WHAT TO DO IN CASE OF A PROBLEM

When the symbol [ E 4 ] appears:

I) The table must be reconfigured. Please implement the following steps:

Important: before you start:

 make sure there is no more pot on the hob

 take a pot with a ferromagnetic bottom and a minimum diameter of 16 cm

 disconnect the appliance from the grid by removing the fuse or turning the circuit breaker off

 start the procedure within 2 minutes after reconnecting the hob to the grid

 reconnect the table to the grid

 don’t use the [ 0/I ] touch

II) First step: cancel the existing configuration

1) Press [ - ] and hold down

2) With your other hand, press successively

and quickly (less than 2s) on each [ O ] key.

Begin from the front right side and turn

contrary clockwise, as described on the

picture (from a to d).

A double "beep" means an error occurred. If so, start again from item 1).

3) Remove your fingers from the touch control, press simultaneously [ + ] and [ - ]

during few seconds, until blinking [ E ] symbols appear.

4) Wait until [ E ] symbols stop blinking.

5) After few seconds, [ E ] are automatically transformed in [ C ]. The existing setup

has been cancelled.

Note: For induction hobs with 3 cooking zones, The rear right zone (b) doesn't

exist, so push 2 times on the front right zone (a) that means (a → a → c → d).

III) Second step: new setup

1) Take a ferromagnetical pot with a minimum diameter of 16 cm

2) Select a cooking zone by pushing on the corresponding [ O ] key

3) Place the pot on the area to be set

4) Wait until the [ C ] display becomes a [ - ]. The selected zone is now configured.

5) Follow the same procedure for each cooking zone with a [ C ] display.

6) All the cooking zones are configured once all the displays are turned off.

Please use the same pot for the whole procedure.

Never put several pots together on the zones during the setup-process.

 If [ E 4 ] displaying remains, please call the customer care

The hob or the cooking zone doesn’t start-up:

 The hob is badly connected on the electrical network.

 The protection fuse cut-off.

 The locking function is activated.

 The sensitive keys are covered with grease or water.

 An object is put on a key.

The control panel displays [ U ]:

 There is no pan on the cooking zone.

 The pan is not compatible with induction.

 The bottom diameter of the pan is too small.

The control panel displays or [ E ]:

 Disconnect and replug the hob.

 Call the After-sales Service.

Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

Forumrules

To achieve meaningful questions, we apply the following rules:

First, read the manual;
Check if your question has been asked previously;
Try to ask your question as clearly as possible;
Did you already try to solve the problem? Please mention this;
Is your problem solved by a visitor then let him/her know in this forum;
To give a response to a question or answer, do not use this form but click on the button 'reply to this question';
Your question will be posted here and emailed to our subscribers. Therefore, avoid filling in personal details.

new questions and answers
new manuals

You will receive an email to register for one or both of the options.

Get your user manual by e-mail

Enter your email address to receive the manual of M-System MI-90 in the language / languages: English, German, Dutch, French as an attachment in your email.

The manual is 0,77 mb in size.

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.

Info

M-System MI-90 Manual

Product: