707325

M-Audio Oxygen 49 Manual

9
Zoom out
Zoom in
Previous page
1/88
Next page
9
1. Press Edit.
2. Press the Device ID key. The LED screen will show the current Device ID (for example, "1.2.7.").
3. Enter the new Device ID number using the number keys.
4. Press the Enter key.
NOTE: If the Device ID number of an Oxygen 49 keyboard is changed after a Memory Dump was recorded into a
DAW application, any attempts to restore it will be ignored because the numbers do not match. If you do not
remember the Device ID number used when the Memory Dump was recorded, set your Oxygen 49 keyboard to
Device ID 127 to ensure all Memory Dumps will be recognized.
Store: The Store function saves control assignment settings to one of 10 memory locations.
IMPORTANT: Storing new assignment settings will overwrite the contents of the selected memory location.
1. Press the Edit button.
2. Press the Store key. The LED screen will show the number of the last selected memory location (for example,
P.0.1).
3. Enter the number of the memory location you want to store the new settings to by using the number keys or the
“<” or “>” buttons.
4. Press the Enter key to save the changes and overwrite the previous settings of the memory location.
NOTE: The Oxygen 49 factory presets can be restored by holding down the "-" and "+" buttons during power up.
This will permanently erase all customized user settings.
Number Keys: This section of the keyboard is used to type in numerical parameter values while in Edit mode.
Enter Key: The Enter key confirms changes made and exits Edit mode.
NOTE: The Panic, Drawbar and Memory Dump functions take immediate effect when the corresponding key is
pressed. Edit mode will exit automatically.
Advanced Programming Functions
The MIDI CC (continuous controller) numbers from 0 to 127 are part of the General MIDI specification, and are
typically used for real-time control of parameters in MIDI compatible music equipment. For example, an Oxygen 49
knob may be assigned to MIDI CC number 10, which controls the Pan setting of a connected synthesizer or DAW
software track. Many of the controls on Oxygen 49 keyboards are fully programmable, and can be assigned to any
of these standard MIDI CCs. However, to simplify assignment of other, more complex MIDI message types (for
example, SysEx or RPN/NRPN), M-Audio has appended such additional MIDI message types to the end of the MIDI
CC number list, extending its range beyond 127.
These additional messages can be assigned to Oxygen 49 controls, just as if they were standard MIDI CCs, but
using numbers in the range from 128 to 255. Generally, this is achieved by selecting the control for editing and
assigning a 3-digit number.
This section provides examples of the typical control assignment procedure for knobs, faders, buttons, wheels, and
the sustain pedal. Assigning MIDI messages that are not explicitly mentioned in this section is done by using the
same basic principle as given in the examples.
NOTE: Your Oxygen 49 keyboard never transmits values outside the range specified by the MIDI protocol (0-127).
The controller numbers from 128-255 are only used internally by your Oxygen 49 keyboard. This simplifies
configuration of the knobs, buttons and faders when assigning advanced MIDI messages, and allows additional
configuration options for the controls (for example, setting the Trigger or Toggle operation of a button).
… 9 …


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for M-Audio Oxygen 49 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of M-Audio Oxygen 49 in the language / languages: English, German, French, Italian, Spanish as an attachment in your email.

The manual is 2,31 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info