707307

M-Audio Hammer 88 Manual

7
Zoom out
Zoom in
Previous page
1/52
Next page
7
Rear Panel
1. Expression Pedal Input: This input is to be used with an expression pedal (such as the
M-Audio EX-P, sold separately) for adding expressive changes during performances. The
M-Audio EX-P Expression Pedal uses a 1/4" TRS connector and is set to normally open
(pedal up). The factory default setting of this input is CC#11 Modulation. The expression
pedal input is fully assignable to CC, Aftertouch, and Pitchbend messages.
2. 1/4” FS2/Soft Pedal Input: This input accepts a soft pedal, such as the M-Audio SP-2
pedal which uses a 1/4" TS connection, to soften the notes and modify the tonal quality.
The soft pedal input is fully assignable to MIDI note numbers, Program Change
messages, CC, or MMC messages using the Hammer 88 editor.
3. Sustain Pedal Input: This input accepts a momentary-contact foot pedal (such as the
M-Audio SP-2, sold separately). When pressed, this pedal which has a 1/4" TS
connector, will sustain the notes you are playing without having to keep your fingers
pressed down on the keys.
Note: The polarity of the sustain and expression pedals is determined by the keyboard
upon startup. When Hammer 88 is powering up, the sustain pedal is assumed to be in the
"up" (Off) position. It is important that the sustain pedal is not pressed during startup,
otherwise the pedal will reverse its operation, and notes will sustain when the pedal is not
pressed.
Note: For an all-in-one solution for connecting pedals to the Soft Pedal and Sustain
Pedal inputs, check out the SP-Dual. The SP-Dual is M-Audio's 2-pedal solution with the
ability to connect to the Soft Pedal and Sustain Pedal inputs on your Hammer 88.
4. MIDI Out Port: This standard 5-pin MIDI connector transmits MIDI data to any
compatible device such as a hardware synthesizer, sound module, or drum machine.
5. USB Port: The USB port delivers power to the keyboard and transmits MIDI data when
connected to a computer.
6. Power Input: This input accepts an optional third party power supply. A power supply
must be connected when using Hammer 88 in stand-alone mode (when triggering
external hardware synths). Use a USB cable to power Hammer 88 when connecting to a
computer to trigger software synths.
1
2
3
4
5 6
… 7 …


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for M-Audio Hammer 88 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of M-Audio Hammer 88 in the language / languages: English, German, French, Italian, Spanish as an attachment in your email.

The manual is 3,04 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info