707307

M-Audio Hammer 88 Manual

6
Zoom out
Zoom in
Previous page
1/52
Next page
6
Features
Top Panel
1. Master Volume Fader: The fader sends
standard messages to control volume and
can also be assigned to different effects
such as pan (balance), attack, reverb,
chorus, etc. using the downloadable
Hammer 88 editor application. The factory
default setting for this fader is CC#7
Volume. The fader is fully assignable to
CC, Aftertouch, and Pitchbend messages.
2. +/– Buttons: These buttons can be
assigned to Program, Octave/Transpose,
CC, and MMC messages. By default,
these buttons are assigned to change the
Octave/Transpose up or down.
3. Pitch Bend Wheel: This wheel creates
expressive changes in performances by
raising and lowering pitch. Rolling the
Pitch Bend wheel upward will raise an
instrument’s pitch whereas rolling it
downward will lower the pitch. The upper
and lower pitch bend limit is determined
by settings on your hardware or software
synthesizer, and usually not by the Pitch Bend wheel on Hammer 88 itself. Typically, this
can be either a half note or an octave up/down. Use the Hammer 88 software editor to
limit the range of the wheel, as well as change its assigned MIDI message. This wheel is
spring mounted and will return to the center detent position when released. The Pitch
Bend wheel is an assignable controller capable of sending a variety of MIDI messages
other than pitch bend data.
4. Modulation Wheel: This wheel is used to add expression to performances by changing
the intensity of certain effects. By default, most synthesizers assign this wheel to control
vibrato (change in pitch) or tremolo (change in volume) although it is usually possible to
reassign the function of this wheel through the instrument’s control panel. Rolling the
Modulation Wheel upward will increase the modulation effect, while rolling downward will
reduce the effect. The Modulation Wheel is an assignable controller capable of sending a
variety of MIDI messages other than Modulation data. The factory default setting for the
wheel is CC#1 Modulation. The modulation wheel is fully assignable to CC, Aftertouch,
and Pitchbend messages.
5. Velocity-sensitive Keyboard: The velocity-sensitive, weighted keyboard is the primary
method of sending Note On/Off and velocity data when performing. The keybed can also
be split or layered to control multiple sounds.
1
2
3
4
5
… 6 …


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for M-Audio Hammer 88 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of M-Audio Hammer 88 in the language / languages: English, German, French, Italian, Spanish as an attachment in your email.

The manual is 3,04 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info