707299
33
Zoom out
Zoom in
Previous page
1/49
Next page
33
MIDI Edit Mode
MIDI Edit Mode lets you edit the parameters of your
controls (minimum values, maximum values, CC or note
numbers, etc.) when used with your DAW.
To navigate this mode:
1. From MIDI Mode, press the Data Dial to enter MIDI
Edit Mode.
2. Press the MIDI button again to view each set of controls (encoders, switches, pads,
footswitch, expression pedal, modulation wheel, pitch-bend wheel, and faders).
Note: When viewing the pads, use the Page Left/Right buttons to view each pad bank.
3. To edit a specific control, turn or press the encoder, switch, or pad you would like to edit
while viewing that control’s group. For example, press Pad 3 while viewing the pads page to
edit the parameters of Pad 3.
4. Use the Cursors to select the parameter you want to edit. Alternatively, turn or press a control
to select it directly.
5. Turn the Data Dial to change a value or setting.
6. Press the Data Dial when viewing an encoder, switch, or pad page to save your changes and
return to the normal MIDI Mode (described above).
Important: To edit parameters for the keybed, enter Global Mode instead.
See the following sections to learn more about using MIDI Edit Mode.
Selecting Controls
You can select a control to edit in a few different ways:
To edit an encoder, switch, or pad, select it in MIDI Mode as described earlier, and then
press the Data Dial. The display will immediately show the control and its parameters.
If you are already editing an encoder, switch, or pad, and want to edit another control of the
same type, simply turn or press it. The display will immediately show the control and its
parameters. For pads, use the Page Left/Right buttons or Pad Bank buttons at any time to
select another bank.
To edit the footswitch, expression pedal, modulation wheel, pitch-bend wheel, or DAW
settings, make sure you are already in MIDI Edit Mode, and then press MIDI button again to
cycle through all available controls. These additional controls will appear in the display after
the pads.
Editing Control Parameters
To edit a control’s parameters, use the Cursors to select the desired parameter, and then turn the
Data Dial to change its value or setting. The new value or setting will take effect immediately; you
do not need to confirm your choice or exit MIDI Edit Mode.
You can continue to edit other parameters for this control, or you can select another control to edit
its parameters instead.
To exit MIDI Edit Mode and return to the normal MIDI Mode, press the Data Dial.
33


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for M-Audio CTRL49 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of M-Audio CTRL49 in the language / languages: English as an attachment in your email.

The manual is 3,5 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of M-Audio CTRL49

M-Audio CTRL49 Quick start guide - English, German, French, Italian, Spanish - 64 pages


The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info